View source for CM-T3530: WinCE: LCDAdapt Manual

== General ==
LCDAdapt is a desktop utility that allows to adjust the CM-T3530 LCD settings. The utility connects to the module by using either Microsoft's ActiveSync (for Windows XP or earlier) or Windows Mobile Device Center (for Windows Vista or Windows 7). 
{{Note| In order to run the application, .Net 3.x framework and data synchronization program (ActiveSync or Windows Mobile Device Center) are required.}}

== Using the LCDAdapt Utility ==
The program starts with the following screen:

::[[Image:LCDAdapt_init.jpg]]


* Press the "Connect" button in order to connect to the target device. The utility will determine target type and current LCD parameters:

::[[Image:LCDAdapt_connected.jpg]]

* Set LCD timing values (you can use [http://www.compulab.co.il/t3530/html/t3530-lcd.htm CompuLab's LCD adaptation service] to obtain the settings) and press the "Send Settings" button. 

* The program configures the device to use the new settings and then restarts it in order for the changes to take effect.

=== Predefined Profiles ===
A number of predefined LCD profiles are provided. These predefined profiles may be used for switching quickly between most common sets of settings and resolutions.

[[Category:Windows CE|LCDAdapt]]
[[Category:CM-T3530|WinCE: LCDAdapt Manual]]