View source for CM-iTC: WES2009: Image Creation And Deployment

== Overview  ==

This article contains instructions for creation and deployment of the [http://msdn.microsoft.com/en-US/library/bb521700(v=WinEmbedded.51).aspx Windows Embedded Standard 2009] (WES2009) image on the [http://www.compulab.co.il/itc/html/itc-cm-datasheet.htm CM-iTC] module. The
[http://www.compulab.co.il/itc/download/itc-wes2009-drv.zip WES2009 Board Support Package] contains the components necessary for creation of the WES2009 image.


== Installation Prerequisites ==
* [http://msdn.microsoft.com/en-us/library/dd450716.aspx#TargetDesigner Microsoft WES2009 Target Designer].
* [http://msdn.microsoft.com/en-us/library/dd450716.aspx#ComponentDatabaseManager Microsoft WES2009 Component Database Manager].


== Importing Components with Component Database Manager ==

Open WES2009 Component Database Manager and import the following components:
* '''iTC_Audio.sld''' -  Contains the Audio Driver for the CM-iTC.
* '''iTC_Chipset.sld'''  -  Contains the SCH and the IO Drivers for the CM-iTC.
* '''iTC_Ethernet.sld'''  -  Contains the Ethernet Driver for the CM-iTC.
* '''iTC_Video.sld'''  -  Contains the Video Driver (IEMGD) for the CM-iTC.

{{Note|If the Component Database Manager does not open in "Exclusive" mode, you should close the Target Designer and the Component Designer and restart the Component Database Manager.}}

Once loaded, the CM-iTC components will show up in their respective folders in the Component Browser window in the Target Designer and they can be used like any other components.


== Building WES2009 image with Target Designer ==

A new WES2009 Image can be built by using the following procedure:
# Load the iTC_WES2009_Sample_Project.slx file.
# Add or remove individual components according to system requirements.
# Resolve Dependencies:
## Enable the dependencies auto-resolve option in Target Designer ({{cmd|Tools >> Options >> Dependency Check}}).
## Run the “Check Dependencies” command ({{cmd|Configurations >> Check Dependencies}}).
# Build the Target Image ({{cmd|Configurations >> Build Target Image}}).


== Deploying the WES2009 Image on the SATA Storage Device ==

# Connect the target SATA Storage Device to the development computer.
# Format the target SATA Storage Device with NTFS and make it active.
# Copy the contents of the WES2009 release directory created by Target Designer into the active partition of the SATA Storage Device.
# Connect the SATA Storage Device to the CM-iTC.
# Boot from the SATA Storage Device. The CM-iTC will boot in [http://msdn.microsoft.com/en-us/library/bb499353(v=WinEmbedded.51).aspx FBA] mode.
# Use “Administrator” login without password to log on. 
# Press OK on “Select NetWare Logon” menu.


== External Links ==

* [http://www.microsoft.com/downloads/en/details.aspx?FamilyID=4715b660-9c24-4088-8448-96c8abf2a940 Download WES2009 Evaluation Edition]
* [http://msdn.microsoft.com/en-US/library/bb521700(v=WinEmbedded.51).aspx WES2009 MSDN Resources]
* [http://blog.augustoalvarez.com.ar/2009/03/29/windows-embedded-standard-2009-step-by-step-deployment-part-i/ WES2009 Step-by-Step Deployment ]
* [http://www.seanliming.com/WES2009_XPe.html WES2009 Sean Liming Resources]



[[Category:Windows Embedded Standard]]
[[Category:CM-iTC]]