View source for IOT-GATE-IMX8PLUS and SBC-IOT-IMX8PLUS Yocto Linux

#REDIRECT [[IOT-GATE-IMX8PLUS Yocto Linux]]
{{summary2|content=
This page contains links to information about Yocto Linux distribution for the Compulab IOT-GATE-IMX8PLUS Internet of Things Gateway and SBC-IOT-IMX8PLUS Single Board Computer.
The Yocto Project is an open-source collaboration focused on embedded Linux development.

|image1=Iot-gate-imx8plus.png
|image2=Sbc-iot-imx8plus.png
}}

{{Resources Linux with app notes
|*[[IOT-GATE-IMX8PLUS: Getting Started|Getting started with IOT-GATE-IMX8PLUS]]
*[[SBC-IOT-IMX8PLUS: Getting Started|Getting started with SBC-IOT-IMX8PLUS]]
* [[IOT-GATE-IMX8PLUS and SBC-IOT-IMX8PLUS: Yocto Linux: How-To Guide|Yocto Linux how-to guide for IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS]]
|* [[IOT-GATE-IMX8PLUS and SBC-IOT-IMX8PLUS: Yocto Linux: Building Yocto images |Building IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS Yocto Linux images ]]
* [[IOT-GATE-IMX8PLUS and SBC-IOT-IMX8PLUS: Yocto Linux: Installation | Installing Yocto on IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS]]
*[[IOT-GATE-IMX8PLUS and SBC-IOT-IMX8PLUS: U-Boot: Recovery | Boot Firmware Recovery]]
|*[[Application Notes: eMMC lifetime optimization | Optimizing eMMC lifetime and reliability]]
}}

__NOTOC__

{{ChangelogRss| content=
===== 26-Jun-2023, IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS Yocto Linux release 2.0 =====
: Release of Yocto 4.0 (kirkstone) for IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS
: - U-Boot 2021.04 based on NXP lf-5.15.32-2.0.0
: - Kernel 5.15.32 based on NXP lf-5.15.32-2.0.0
: HW Features:
: - Added support for SB-IOTGIMX8PLUS EEPROM
: - Added support for LED Green_1
: - Added support for FCCAN I/O module
: - Added support for FXTPM add-on board
: - Added support for break-out add-on board
: Documentation:
: - Updated multiple articles to comply with the new release

===== 10-Oct-2022, IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS Yocto Linux release 1.0 =====
: Release of Yocto 4.0 (kirkstone) for IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS
: - U-Boot 2021.04 based on NXP lf_v2021.04
: - Kernel 5.15.32 based on NXP lf-5.15.y
: HW Features:
: - eMMC storage
: - USB3.0 Host port
: - 2x USB2.0 Host ports
: - 2x Ethernet
: - WiFi (Intel AX210)
: - Bluetooth
: - 4G/LTE modem (Quectel EC25E/EC25A)
: - 1x CAN 2.0B
: - Display output
: - Industrial I/O extension modules:
:: - Up to 3x RS485 / RS232
:: - Digital I/O( 4x DI, 4x DO)
: - RTC
: - Watchdog
: - 2x dual color user LEDs
: - 1x serial console (micro-USB connector)
: - USB programming interface for NXP SDP/UUU (micro-USB connector)
: SW Features:
: - CompuLab Deployment Tool
: - Linux CLI utilities for access to U-Boot environment
: Documentation:
: - Initial Yocto Linux documentation for IOT-GATE-IMX8PLUS / SBC-IOT-IMX8PLUS
}}

[[Category:Linux]]
[[Category:Yocto]]
[[Category:IOT-GATE-IMX8PLUS]]
[[Category:SBC-IOT-IMX8PLUS]]