View source for IOT-GATE-RPI4 OS Configuration Layer

== Overview ==
IOT-GATE-RPI4 runs standard [https://www.raspberrypi.com/software/operating-systems/ Raspberry Pi OS] with an additional IOT-GATE-RPI4 OS Configuration Layer that sets-up the gateway peripheral devices and provides useful tools for device configuration and management.<br>
This article provides instructions needed to install IOT-GATE-RPI4 OS Configuration Layer onto the Compulab IOT-GATE-RPI4 that runs standard Raspberry Pi OS.<br>
IOT-GATE-RPI4 OS Configuration Layer is supplied as deb package named ''iotg-rpi4-config''. Upgrading a standard Raspberry Pi OS with IOT-GATE-RPI4 OS Configuration Layer is as simple as downloading and installing deb package.

== Downloading ==
Use the following command to download and extract IOT-GATE-RPI4 OS configuration layer package archive:
<pre>
pi@raspberrypi:~$ sudo wget https://www.compulab.com/wp-content/uploads/2022/04/iotg-rpi4_os-config-layer.zip -P /opt
...
pi@raspberrypi:~$ sudo unzip /opt/iotg-rpi4_os-config-layer.zip -d /opt
</pre>

== Installation ==
Install ''iotg-rpi4-config'' package by using the command:
<pre>
pi@raspberrypi:~$ sudo apt update && sudo apt install /opt/iotg-rpi4-config_1.3-1_all.deb
</pre>

== After installation ==
* Reboot IOT-GATE-RPI4  <br>

[[Category:Linux]]
[[Category:IOT-GATE-RPI4]]