View source for IOT-GATE-RPi: Raspbian: Package contents

== Package contents ==

__NOTOC__

=== Layout ===
<pre>
iot-gate-rpi-raspbian/
├── install-script.sh
├── iot-gate-dt.deb
├── iot-gate-eth.deb
├── iot-gate-serial.deb
├── readme.txt
├── rpi3-modem.deb
├── rpi3-rtc.deb
└── version.txt
</pre>

=== iot-gate-rpi-raspbian ===
* {{filename|install-script.sh}} - A script which installs all deb packages.
* {{filename|iot-gate-dt.deb}} - A deb package that switches to the correct device tree.
* {{filename|iot-gate-eth.deb}} - A deb package that gives the ability to set up mac addresses for Ethernets.
* {{filename|iot-gate-serial.deb}} - A deb package that enables the use of the rear serial port.
* {{filename|rpi3-modem.deb}} - A deb package that sets up all of the dependencies needed for a cellular modem.
* {{filename|rpi3-rtc.deb}} - A deb package that enables the setup of the system clock from the hardware clock.
* {{filename|version.txt}} - The contents of the {{filename|version.txt}} identifies the package version



[[Category:Linux]]
[[Category:IOT-GATE-RPi]]