View source for Transclusion: CL-SOM-iMX7: U-Boot: Firmware Overview

== SPL ==
SPL is responsible for initial clock setup, DDR initialization and boot media controller initialization. It is loaded into the CPU internal SRAM immediately after system reset. After basic hardware setup, SPL loads U-Boot bootloader into the system RAM and transfers control to the U-Boot bootloader.

== U-Boot ==
U-Boot is the bootloader used on the device. It allows flexible selection of operating system boot modes, provides scripting facilities and command line interface through a serial port.
U-Boot allows booting operating system from the on-board eMMC flash, removable storage (e.g. USB drive, SD/MMC card), or the network (TFTP/NFS server).

Please consult [[U-Boot: Quick reference]] and [http://www.denx.de/wiki/U-Boot/Documentation U-Boot project documentation] for U-Boot features and commands description.

=== U-Boot environment ===
U-Boot environment resides on the SPI flash, regardless of the boot source. The environment resides at offset 0xC0000 from the start of SPI flash, and its size is 8KiB.

== Boot sources ==
The device can boot from either a micro SD card, or the on-board SPI flash.

The following sections describe the layout of each storage type.

=== Default storage device mapping ===
{| cellpadding="3" border="1" style="border: 1px solid rgb(85, 85, 85); border-collapse: collapse;"
|+ SPI flash mapping
|-
! Offset
! Size
! Description
|-
| 0x0 (0KB)
| 0xc0000 (768KB)
| U-Boot
|-
| 0xc0000 (768KB)
| 0x40000 (256KB)
| U-Boot environment
|-
| 0x100000 (1MB)
| Remaining SPI flash space
| Splash image
|}

{| cellpadding="3" border="1" style="border: 1px solid rgb(85, 85, 85); border-collapse: collapse;"
|+ NAND flash mapping
|-
! Offset
! Size
! Description
|-
| 0x0 (0KB)
| 0x980000 (9.5MB)
| Kernel (zImage)
|-
| 0x980000 (9.5MB)
| 0x80000 (512KB)
| Device Tree blob (.dtb)
|-
| 0xa00000 (10MB)
| Remaining NAND flash space
| Root filesystem
|}

{| cellpadding="3" border="1" style="border: 1px solid rgb(85, 85, 85); border-collapse: collapse;"
|+ SD card mapping
|-
! Offset
! Size
! Description
|-
| 0x0 (0KB)
| 0x400 (1KB)
| Reserved/MBR
|-
| 0x400 (1KB)
| 0xffc00 (999KB)
| U-Boot
|-
| 0x100000 (1MB)
| Remaining SD-card space
| Partitions/Filesystems/Data
|}