CL-SOM-iMX7: Evaluation Kit: Getting Started - Revision history

Nikita: /* What Next? */

2017-07-11T15:37:57Z

‎What Next?

Grinberg: /* What Next? */

2017-03-27T12:49:56Z

‎What Next?

Grinberg at 10:29, 25 May 2016

2016-05-25T10:29:21Z

Grinberg at 06:24, 25 May 2016

2016-05-25T06:24:56Z

Grinberg: /* What Next? */

2016-05-22T10:58:59Z

‎What Next?

New page

[[Image:CL-SOM-iMX7-eval-kit-quick-setup.jpg|800px]]
[[Image:SB_SOM_topview2.jpg|thumb|right|alt=SB-SOM top view|<div align="center">SB-SOM top view</div>]]

= System setup =
[[Image:SB_SOM_bottomview2.jpg|thumb|right|alt=SB-SOM bottom view|<div align="center">SB-SOM bottom view</div>]]
CL-SOM-iMX7 evaluation kit is preloaded with [[CL-SOM-iMX7: Linux: Debian|Debian Linux image for CL-SOM-iMX7]].
# Connect a DVI/HDMI Display to HDMI connector '''J5''' using a standard HDMI/DVI cable.
# Connect a USB Keyboard to USB connector '''P6'''.
# Make sure jumpers '''E7''', '''E3''' and  '''E1''' are not populated (default state).
# Connect the standard USB cable (included) between your host PC and the evaluation kit micro-USB2.0 connector  '''P7'''.
# On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
<blockquote>
{{:SB-SOM: serial port parameters table}}
</blockquote>

= Starting the system =
# Connect the DC 12V power supply adapter (included) to  '''J6'''.
# Follow the messages in your terminal emulator program until you see the linux login prompt.
# '''NOTE:''' in case no messages appear in your terminal emulation program, please refer to the detailed [[SB-SOM: HOWTO: USB Console|USB console]] guide.
# Use the credentials below to login.
:* username: root
:* password: 111111

= What Next? =
*[[CL-SOM-iMX7 Freescale i.MX7 Linux|CL-SOM-iMX7 Linux guide]]


*[http://www.compulab.co.il/products/computer-on-modules/CL-SOM-iMX7/#devres CL-SOM-iMX7 development resources]

[[Category:SB-SOM]]
[[Category:CL-SOM-iMX7]]

@@ Line 27: / Line 27: @@
 == What Next? ==
 * [[CL-SOM-iMX7 Freescale i.MX7 Linux|CL-SOM-iMX7 Linux guide]]
 * [[CL-SOM-iMX7 NXP i.MX7 Yocto Linux|CL-SOM-iMX7 Yocto guide]]
 * [[CL-SOM-iMX7: Evaluation Kit: Hardware Guide|CL-SOM-iMX7 evaluation kit hardware guide]]
 * [http://www.compulab.com/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/#devres CL-SOM-iMX7 development resources]

@@ Line 28: / Line 28: @@
 == What Next? ==
 * [[CL-SOM-iMX7 Freescale i.MX7 Linux|CL-SOM-iMX7 Linux guide]]
-<!-- * [[CL-SOM-iMX7 Freescale i.MX7 Yocto Linux|CL-SOM-iMX7 Yocto guide]] -->
+* [[CL-SOM-iMX7 NXP i.MX7 Yocto Linux|CL-SOM-iMX7 Yocto guide]]
 * [[CL-SOM-iMX7: Evaluation Kit: Hardware Guide|CL-SOM-iMX7 evaluation kit hardware guide]]
-* [http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/#devres CL-SOM-iMX7 development resources]
+* [http://www.compulab.com/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/#devres CL-SOM-iMX7 development resources]
 [[Category:SB-SOM]]
 [[Category:CL-SOM-iMX7]]

@@ Line 7: / Line 7: @@
 # Connect a DVI/HDMI Display to HDMI connector '''J5''' using a standard HDMI/DVI cable.
 # Connect a USB Keyboard to USB connector '''P6'''.
-# Make sure jumpers <!-- [[SB-SOM:_Jumpers:_E3|E3]] -->'''E7''', '''E3''' and <!-- [[SB-SOM:_Jumpers:_E1|E1]] --> '''E1''' are not populated (default state).
+# Make sure jumpers '''E7''', '''E3''' and '''E1''' are not populated (default state).
-# Connect the standard USB cable (included) between your host PC and the evaluation kit micro-USB2.0 connector <!-- [[SB-SOM:_Connectors:_P7|P7]] --> '''P7'''.
+# Connect the standard USB cable (included) between your host PC and the evaluation kit micro-USB2.0 connector '''P7'''.
 # On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
 <blockquote>
 {{:SB-SOM: serial port parameters table}}
 </blockquote>
 == Starting the system ==
-# Connect the DC 12V power supply adapter (included) to <!-- [[SB-SOM:_Connectors:_J6_and_J8|main DC power connector - J6]] --> '''J6'''.
+# Connect the DC 12V power supply adapter (included) to main DC power connector - '''J6'''.
 # Follow the messages in your terminal emulator program until you see the linux login prompt.
 # Use the credentials below to login.
 :* username: root
 :* password: 111111
 == What Next? ==
-*[[CL-SOM-iMX7 Freescale i.MX7 Linux|CL-SOM-iMX7 Linux guide]]
+* [[CL-SOM-iMX7 Freescale i.MX7 Linux|CL-SOM-iMX7 Linux guide]]
-<!-- *[[CL-SOM-iMX7 Freescale i.MX7 Yocto Linux|CL-SOM-iMX7 Yocto guide]] -->
+<!-- * [[CL-SOM-iMX7 Freescale i.MX7 Yocto Linux|CL-SOM-iMX7 Yocto guide]] -->
-*[[CL-SOM-iMX7: Evaluation Kit: Hardware Guide|CL-SOM-iMX7 evaluation kit hardware guide]]
+* [[CL-SOM-iMX7: Evaluation Kit: Hardware Guide|CL-SOM-iMX7 evaluation kit hardware guide]]
-*[http://www.compulab.co.il/products/computer-on-modules/CL-SOM-iMX7/#devres CL-SOM-iMX7 development resources]
+* [http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/#devres CL-SOM-iMX7 development resources]
 [[Category:SB-SOM]]
 [[Category:CL-SOM-iMX7]]