Grinberg at 12:50, 10 September 2015

2015-09-10T12:50:05Z

New page

== Overview ==
* The Linux package for COMEX-IC40D includes a ready-to-run image that can be installed on SSD disk, mSATA card, or USB storage device connected to the SB-COMEX carrier board
* Download the [http://compulab.co.il/products/computer-on-modules/comex-ic40d/#devres Linux Package] for COMEX-IC40D to the host PC and ensure the integrity of the file:
<pre>
$ md5sum comex-ic40d_linux_2015-09-10.zip
e25820cc569af560a5dbae4d9e711bbe comex-ic40d_linux_2015-09-10.zip
</pre>
* Unzip the downloaded archive.

== Installation ==
* Prepare either an SSD disk, mSATA card, or USB storage device. It must have at least 8GB capacity
* Connect the storage device to the host PC
* Run this command to figure out what device name was assigned to your storage device:
<pre>
$ ls -all /dev/disk/by-id/
</pre>
* Assuming your storage device was detected as /dev/sdx write the image onto it:
<pre>
$ gzip -dc /path/to/comex-ic40d-linux/images/comex-ic40d.mint17.8GB.dd.gz | sudo dd of=/dev/sdx bs=1MB
</pre>
* Connect the storage device to the SB-COMEX carrier board

== Welcome to Linux Mint 17 LTS ==
* Power on the COMEX-IC40D evaluation system.
* On first boot choose your language, timezone, username, password etc.

== See also ==
* [[COMEX-IC40D: Linux: Kernel|Linux Kernel for COMEX-IC40D]]
* [[COMEX-IC40D: Linux: Mint|Linux Mint for COMEX-IC40D]]
* [[COMEX-IC40D Intel Haswell COM Express Linux|Linux for COMEX-IC40D]]

[[Category:Linux]]
[[Category:COMEX]]
[[Category:COMEX-IC40D]]

COMEX-IC40D: Linux: Getting started - Revision history

Grinberg at 12:50, 10 September 2015