Igor at 08:27, 16 February 2023

2023-02-16T08:27:52Z

Igor: Created page with "= Quick Setup = * Connect HDMI monitor to the IOT-GATE-RPi4 display output using a standard HDMI cable. * Connect USB mouse and keyboard devices to the IOT-GATE-RPI4 USB conn..."

2021-10-28T10:23:52Z

Created page with "= Quick Setup = * Connect HDMI monitor to the IOT-GATE-RPi4 display output using a standard HDMI cable. * Connect USB mouse and keyboard devices to the IOT-GATE-RPI4 USB conn..."

New page

= Quick Setup =

* Connect HDMI monitor to the IOT-GATE-RPi4 display output using a standard HDMI cable.
* Connect USB mouse and keyboard devices to the IOT-GATE-RPI4 USB connectors.
* Insert the AC power supply blade into the power supply unit.
* Insert the power supply plug into the IOT-GATE-RPI4 input jack. Turn the power plug clockwise to lock the plug.
* IOT-GATE-RPi4 will automatically boot into the OS

= IOT-GATE-RPI4 Overview =

=== Front panel ===
: [[Image:Iot-gate-rpi4 front-panel.png|800px]]

=== Back panel ===
: [[Image:Iot-gate-rpi4 back-panel.png|800px]]

=== Left and Right panels ===
: [[Image:Iot-gate-rpi4 left-right-panel.png|1000px]]

=== Default antenna connector assignment ===
{| class="wikitable" cellspacing="1" cellpadding="1" border="2" width="500" style="text-align: center
| style= background-color:#ffffcc;" | '''Connector'''
| style= background-color:#ffffcc;" | '''Function'''
|-
| WiFi / BT
| Wifi / Bluetooth antenna
|-
| WWAN
| Main LTE antenna
|-
| AUX
| Auxiliary GNSS antenna
|-
|}

=== Service bay ===
: [[Image:Iot-gate-rpi4 service-bay.png‎‎|800px]]

= SIM card installation =
* Remove the screw from the SIM/PROG tray-cover
* Insert a SIM removal tool into the cover popping hole to pop the tray-cover
* Place the SIM into the tray
* Carefully push the tray-cover back in
* Close the SIM/PROG cover screw (optional)
: [[Image:Iot-gate-rpi4 sim-tray-cover.png|800px]]

= Headless Quick Setup =
In case a monitor is not available, IOT-GATE-RPI4 can be used with a host PC console terminal.

* Connect a micro USB cable between host PC and IOT-GATE-RPI4 micro-USB debug console connector.
* On your host PC, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
{| class="wikitable" cellspacing="1" cellpadding="1" border="2" width="500" style="text-align: center
| style= background-color:#ffffcc;" | '''Baud Rate'''
| style= background-color:#ffffcc;" | '''Data Bits'''
| style= background-color:#ffffcc;" | '''Stop Bits'''
| style= background-color:#ffffcc;" | '''Flow Control'''
|-
| 115200
| 8
| NONE
| NONE
|}

* Plug the power supply unit into an AC outlet. IOT-GATE-RPI4 will turn on and boot into Linux.
* Use "pi" as a username and "raspberry" as a password as initial Linux account credentials.

[[Category:IOT-GATE-RPI4]]

@@ Line 1: / Line 1: @@
 = Quick Setup =
-* Connect HDMI monitor to the IOT-GATE-RPi4 display output using a standard HDMI cable.
+* Connect HDMI monitor to the IOT-GATE-RPI4 display output using a standard HDMI cable.
 * Connect USB mouse and keyboard devices to the IOT-GATE-RPI4 USB connectors.
 * Insert the AC power supply blade into the power supply unit.
 * Insert the power supply plug into the IOT-GATE-RPI4 input jack. Turn the power plug clockwise to lock the plug.
-* IOT-GATE-RPi4 will automatically boot into the OS
+* IOT-GATE-RPI4 will automatically boot into the OS
 = IOT-GATE-RPI4 Overview =
@@ Line 38: / Line 38: @@
 = SIM card installation =
 * Remove the screw from the SIM/PROG tray-cover
 * Insert a SIM removal tool into the cover popping hole to pop the tray-cover
 * Place the SIM into the tray
-* Carefully push the tray-cover back in
+* Mind the SIM tray orientation. You will need to turn the device upside down to keep the SIM from falling off the tray. Carefully push the tray cover back in
 * Close the SIM/PROG cover screw (optional)
 : [[Image:Iot-gate-rpi4 sim-tray-cover.png|800px]]
@@ Line 48: / Line 50: @@
 In case a monitor is not available, IOT-GATE-RPI4 can be used with a host PC console terminal.
-* Connect a micro USB cable between host PC and IOT-GATE-RPI4 micro-USB debug console connector.
+* Use standard USB-to-micro USB cable to connect host PC and IOT-GATE-RPI4.
-* On your host PC, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
+:* Plug micro USB end to IOT-GATE-RPI4's micro-USB debug console connector
 {| class="wikitable" cellspacing="1" cellpadding="1" border="2" width="500" style="text-align: center
 | style= background-color:#ffffcc;" | '''Baud Rate'''
@@ Line 64: / Line 68: @@
 * Plug the power supply unit into an AC outlet. IOT-GATE-RPI4 will turn on and boot into Linux.
 * Use "pi" as a username and "raspberry" as a password as initial Linux account credentials.
 [[Category:IOT-GATE-RPI4]]

IOT-GATE-RPI4: Getting Started - Revision history

Igor at 08:27, 16 February 2023

Igor: Created page with "= Quick Setup = * Connect HDMI monitor to the IOT-GATE-RPi4 display output using a standard HDMI cable. * Connect USB mouse and keyboard devices to the IOT-GATE-RPI4 USB conn..."