Igor at 12:07, 24 May 2026

2026-05-24T12:07:48Z

Igor: Created page with "NOTOC = Quick Setup = * Connect HDMI monitor to the IOT-GATE-RPI5 display output using an HDMI cable. Connect USB mouse and keyboard devices to the IOT-GATE-RPI5 USB conne..."

2026-05-19T11:08:26Z

Created page with "__NOTOC__ = Quick Setup = * Connect HDMI monitor to the IOT-GATE-RPI5 display output using an HDMI cable. Connect USB mouse and keyboard devices to the IOT-GATE-RPI5 USB conne..."

New page

__NOTOC__
= Quick Setup =
* Connect HDMI monitor to the IOT-GATE-RPI5 display output using an HDMI cable. Connect USB mouse and keyboard devices to the IOT-GATE-RPI5 USB connectors.
** NOTE: Raspberry Pi O/S first boot setup requires display and keyboard. It cannot be completed via serial console.
** NOTE: IOT-GATE-RPI5 features mini-HDMI type-C connectors. To connect a standard HDMI type-A cable, use the Compulab '''IOTG2-ACC-HDMIC2A''' (or equivalent) adapter.
* Connect power to IOT-GATE-RPI5 using one of the following options:
** Use the Compulab '''IOTG2-ACC-PSUTB3''' PSU. Insert the PSU plug into the IOT-GATE-RPI5 DC input terminal block.
** Use any 12V–24V DC power supply. Use the IOT-GATE-RPI5 DC terminal block plug to connect the power supply wires and ensure correct polarity.
* Once power is connected, IOT-GATE-RPI5 will turn on and boot into the O/S.
* The '''ON''' LED indicates IOT-GATE-RPI5 system status:
** Blinking blue — the operating system is running correctly.
** Solid amber — unit is in boo-loader stage. O/S is not running.

= IOT-GATE-RPI5 Overview =

=== Front panel layout ===
{| class="wikitable" cellspacing="1" cellpadding="1" border="2" width="1200" style="text-align: center
| style= background-color:#ffffcc;" | '''Figure'''
| style= background-color:#ffffcc;" | '''Callout'''
| style= background-color:#ffffcc;" | '''Function'''
|-
| rowspan=12 style="width: 65%;" | [[Image:Iot-gate-rpi5 main-panel.jpg|800px]]
| style="width: 5%;" | 1
| style="text-align: left;" | Industrial I/O terminal block Mating connector is included with the gateway
|-
| 2
| style="text-align: left;" | USB3.0 port, type-A connector
|-
| 3
| style="text-align: left;" | ETH1 100Mbit port, RJ45 connector
|-
| 4
| style="text-align: left;" | ETH0 1000Mbit port, RJ45 connector. Supports PoE 802.3af (powered device)
|-
| 5
| style="text-align: left;" | Antenna connector A (LTE main)
|-
| 6
| style="text-align: left;" | Antenna connector B (GNSS / Mesh )
|-
| 7
| style="text-align: left;" | Antenna connector C (WiFi / BT)
|-
| 8
| style="text-align: left;" | DC power input connector Mating connector is included with the gateway
|-
| 9
| style="text-align: left;" | Console connector, micro-USB type
|-
| 10
| style="text-align: left;" | User programmable recessed push-button
|-
| 11
| style="text-align: left;" | User programmable LED A (green / red)
|-
| 12
| style="text-align: left;" | System status LED (blue / amber)
|-
|}

=== Side panel layout ===
{| class="wikitable" cellspacing="1" cellpadding="1" border="2" width="1200" style="text-align: center
| style= background-color:#ffffcc;" | '''Figure'''
| style= background-color:#ffffcc;" | '''Callout'''
| style= background-color:#ffffcc;" | '''Function'''
|-
| rowspan=4 style="width: 65%;" | [[Image:Iot-gate-rpi5 side-panel.jpg|left|800px]]
| style="width: 5%;" | 1
| style="text-align: left;" | Display output 1, mini HDMI connector
|-
| 2
| style="text-align: left;" | Display output 2, mini HDMI connector
|-
| 3
| style="text-align: left;" | USB2.0 port, type-A connector
|-
| colspan=2 style="text-align: left;" | 
|-
|}

=== Service bay layout ===
{| class="wikitable" cellspacing="1" cellpadding="1" border="2" width="1200" style="text-align: center
| style= background-color:#ffffcc;" | '''Figure'''
| style= background-color:#ffffcc;" | '''Callout'''
| style= background-color:#ffffcc;" | '''Function'''
|-
| rowspan=6 style="width: 65%;" | [[Image:Iot-gate-rpi5 service-bay.jpg|left|800px]]
| 1
| style="text-align: left;" | RTC battery holder
|-
| 2
| style="text-align: left;" | Programming port (RPIboot), micro-USB connector
|-
| 3
| style="text-align: left;" | Micro-SIM card socket.
|-
| 4
| style="text-align: left;" | Service bay door
|-
| 5
| style="text-align: left;" | Service bay screw
|-
| colspan=2 style="text-align: left;" | 
|-
|}

= Additional Resources =

* [https://www.compulab.com/products/iot-gateways/iot-gate-rpi5-industrial-raspberry-pi-iot-edge-gateway/#devres IOT-GATE-RPI5 Resources]

[[Category:IOT-GATE-RPI5]]

@@ Line 1: / Line 1: @@
 __NOTOC__
 = Quick Setup =
-* Connect HDMI monitor to the IOT-GATE-RPI5 display output using an HDMI cable. Connect USB mouse and keyboard devices to the IOT-GATE-RPI5 USB connectors.
+* Connect HDMI monitor to the IOT-GATE-RPI5 display output using an HDMI cable.
 ** <u>NOTE</u>: Raspberry Pi O/S first boot setup requires display and keyboard. It cannot be completed via serial console.
 * Connect power to IOT-GATE-RPI5 using one of the following options:
 ** Use the Compulab '''IOTG2-ACC-PSUTB3''' PSU. Insert the PSU plug into the IOT-GATE-RPI5 DC input terminal block.
-** Use any 12V–24V DC power supply. Use the IOT-GATE-RPI5 DC terminal block plug to connect the power supply wires and ensure correct polarity.
+** Use any 12V–24V DC power supply. Connect PSU wires to the IOT-GATE-RPI5 DC terminal block plug and ensure correct polarity.
 * Once power is connected, IOT-GATE-RPI5 will turn on and boot into the O/S.
 * The '''ON''' LED indicates IOT-GATE-RPI5 system status:

IOT-GATE-RPI5: Getting Started - Revision history

Igor at 12:07, 24 May 2026

Igor: Created page with "__NOTOC__ = Quick Setup = * Connect HDMI monitor to the IOT-GATE-RPI5 display output using an HDMI cable. Connect USB mouse and keyboard devices to the IOT-GATE-RPI5 USB conne..."

Igor: Created page with "NOTOC = Quick Setup = * Connect HDMI monitor to the IOT-GATE-RPI5 display output using an HDMI cable. Connect USB mouse and keyboard devices to the IOT-GATE-RPI5 USB conne..."