imported>Uri.mashiach: Created page with "IOT-GATE-iMX8 / SBC-IOT-iMX8 features an optional Bluetooth 5.1 BLE interface, implemented with the Intel WiFi 6 AX200 module. == Host Controller Interface (HCI) Initializatio..."

2020-09-14T07:56:50Z

Created page with "IOT-GATE-iMX8 / SBC-IOT-iMX8 features an optional Bluetooth 5.1 BLE interface, implemented with the Intel WiFi 6 AX200 module. == Host Controller Interface (HCI) Initializatio..."

New page

IOT-GATE-iMX8 / SBC-IOT-iMX8 features an optional Bluetooth 5.1 BLE interface, implemented with the Intel WiFi 6 AX200 module.
== Host Controller Interface (HCI) Initialization ==
* HCI requires no user interaction for being configured. The driver gets loaded automatically unless this option has been disabled by putting a black list rule for this device.<br>
* HCI device configuration utility can be run to retrieve detailed information about the Bluetooth interfaces:
<pre>
root@iot-gate-imx8:~# hciconfig hci0 -a
hci0: Type: Primary Bus: USB
BD Address: 38:00:25:AF:FF:59 ACL MTU: 1021:4 SCO MTU: 96:6
UP RUNNING
RX bytes:751 acl:0 sco:0 events:52 errors:0
TX bytes:2676 acl:0 sco:0 commands:52 errors:0
Features: 0xbf 0xfe 0x0f 0xfe 0xdb 0xff 0x7b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH SNIFF
Link mode: SLAVE ACCEPT
Name: 'iot-gate-imx8'
Class: 0x000000
Service Classes: Unspecified
Device Class: Miscellaneous,
HCI Version: 5.0 (0x9) Revision: 0x100
LMP Version: 5.0 (0x9) Subversion: 0x100
Manufacturer: Intel Corp. (2)
</pre>
* If the HCI device is not running, use the below command to enable the HCI device:
<pre>
root@iot-gate-imx8:~# hciconfig hci0 up
</pre>
* HCI Inquire remote devices.
<pre>
root@iot-gate-imx8:~# hcitool scan
Scanning ...
</pre>

Transclusion: IOT-GATE-iMX8: Bluetooth - Revision history

imported>Uri.mashiach: Created page with "IOT-GATE-iMX8 / SBC-IOT-iMX8 features an optional Bluetooth 5.1 BLE interface, implemented with the Intel WiFi 6 AX200 module. == Host Controller Interface (HCI) Initializatio..."