imported>Uri.mashiach at 07:26, 22 September 2020

2020-09-22T07:26:31Z

imported>Uri.mashiach: Created page with "The `CompuLab Deployment Tool` is a shell script that allows to deploy a working OS image from USB flash drive to the IOT-GATE-iMX8 / SBC-IOT-iMX8 on-board storage (eMMC). Fo..."

2020-09-14T07:13:09Z

Created page with "The `CompuLab Deployment Tool` is a shell script that allows to deploy a working OS image from USB flash drive to the IOT-GATE-iMX8 / SBC-IOT-iMX8 on-board storage (eMMC). Fo..."

New page

The `CompuLab Deployment Tool` is a shell script that allows to deploy a working OS image from USB flash drive to the IOT-GATE-iMX8 / SBC-IOT-iMX8 on-board storage (eMMC).

Follow the step-by-step procedure for a selected image:

* In the terminal window issue: <pre>cl-deploy</pre>
* Follow the steps below:

{| width="60%" cellspacing="1" cellpadding="1" border="1"
|-
| align="center" | '''Action'''
| align="center" | '''Screenshot'''
|-
|
:Select installation target storage '''/dev/mmcblk2'''
| Select a destination device
────────────────────────────────────────────────────

┌────────────────────────────────────────┐
│ Available Devices: │
│ ┌────────────────────────────────────┐ │
│ │ ( ) /dev/mmcblk1 │ │
│ │ (*) /dev/mmcblk2 │ │
│ │ │ │
│ │ │ │
│ │ │ │
│ └────────────────────────────────────┘ │
├────────────────────────────────────────┤
│ < OK > <Cancel> │
└────────────────────────────────────────┘
|-
|
:Be aware of the fact that all the data on the target storage will be erased
| Start Deployment
────────────────────────────────────────────────────

┌─────────────── WARNING ───────────────┐
│ Src: /dev/sda -> Dst: /dev/mmcblk2 │
│ │
│ All data on /dev/mmcblk2 will be │
│ destroyed │
│ │
│ │
│ │
├────────────────────────────────────────┤
│ < Yes > < No > │
└────────────────────────────────────────┘
|-
|
:While installation process is running the output screen shows the log and progress
|Allocating group tables: done 
Writing inode tables: done 
Creating journal (4096 blocks): done 
Writing superblocks and filesystem accounting information: 
done 
[ 1074.510952] EXT4-fs (mmcblk2p1): mounted filesystem 
with ordered data mode. Opts: (null) 
[ 1074.617588] EXT4-fs (sda1): mounted filesystem with 
ordered data mode. Opts: (null) 
[ /dev/sda1 => /dev/mmcblk2p1 ]: 
17.9MiB 0:00:01 [17.8MiB/s] [         <=>         ] 
|-
|
:When installation is complete, the following message will show up
| Finished with success
────────────────────────────────────────────────────

┌────────────────────────────────────────┐
│ Boot media has been deployed on │
│ /dev/mmcblk2 │
│ │
│ Would you like to reboot the device │
│ now? │
│ │
│ │
├────────────────────────────────────────┤
│ < Yes > < No > │
└────────────────────────────────────────┘
|}

@@ Line 3: / Line 3: @@
 Follow the step-by-step procedure for a selected image:
-* In the terminal window issue: <pre>cl-deploy</pre>
+* In the terminal window issue, root privilege is needed (sudu):
 * Follow the steps below:
 </br>
@@ Line 12: / Line 15: @@
 |-
+|
-:Select installation target storage '''/dev/mmcblk2'''
+:Use the space bar key to select the installation target storage '''/dev/mmcblk2'''
 | Select a destination device
 ────────────────────────────────────────────────────

Transclusion: IOT-GATE-iMX8: cl-deply - Revision history

imported>Uri.mashiach at 07:26, 22 September 2020

imported>Uri.mashiach: Created page with "The `CompuLab Deployment Tool` is a shell script that allows to deploy a working OS image from USB flash drive to the IOT-GATE-iMX8 / SBC-IOT-iMX8 on-board storage (eMMC). Fo..."