Difference between revisions of "IOT-DIN-IMX8PLUS: Getting Started"

From Compulab Mediawiki
Jump to: navigation, search
(IOT-DIN-IMX8PLUS Overview)
(Additional Resources)
 
(One intermediate revision by the same user not shown)
Line 59: Line 59:
  
 
= Additional Resources =
 
= Additional Resources =
<br>
+
</br>
 
*[[IOT-DIN-IMX8PLUS: Debian Linux: How-To Guide|IOT-DIN-IMX8PLUS Debian Linux How-To Guide]]
 
*[[IOT-DIN-IMX8PLUS: Debian Linux: How-To Guide|IOT-DIN-IMX8PLUS Debian Linux How-To Guide]]
 
* [https://www.compulab.com/products/iot-gateways/iot-din-imx8plus-industrial-iot-gateway/#devres IOT-DIN-IMX8PLUS Resources]
 
* [https://www.compulab.com/products/iot-gateways/iot-din-imx8plus-industrial-iot-gateway/#devres IOT-DIN-IMX8PLUS Resources]
  
 
[[Category:IOT-DIN-IMX8PLUS]]
 
[[Category:IOT-DIN-IMX8PLUS]]

Latest revision as of 08:20, 11 June 2024

Quick Setup

  • Connect a USB cable between host PC and IOT-DIN-IMX8PLUS micro-USB console DBG connector.
  • Insert the AC power-supply blade into the power supply unit.
  • Insert the power supply plug into the IOT-DIN-IMX8PLUS DC input terminal block.
  • On your host PC, start a terminal emulation program (such as Tera Term or PuTTy) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control
115200 8 1 none none
  • Plug the power supply unit into an AC outlet. IOT-DIN-IMX8PLUS will turn on and boot into Linux.
  • To login into Linux use "compulab" as username and set the password per first login instructions.

IOT-DIN-IMX8PLUS Overview

Iot-din-imx8plus-front-panel.jpg


Front panel layout

Callout Function
1 System status indicator. Dual-color blue/amber LED
2 USB 3.0 connector
3 User programmable LED A & LED B
4 User programmable recessed push-button
5 Ethernet ports, dual RJ45 connector
6 System reset push-button
7 Console connector, micro-USB type
8 Antenna A, SMA *
9 Industrial I/O terminal block, 16 pin, 16-26 AWG
10 Antenna B, SMA *
11 Power input connector



Additional Resources