Difference between revisions of "CM-FX6: Linux: Known Issues"

Revision as of 15:29, 2 June 2013

Enlightenment Window Manager

If the Touchscreen profile is selected the Settings Panel doesn't have Profiles setting menu. It is not possible to switch the profile.

Workaround : Launch the xterm from Applications->Accessories and change the default profile from the command line:

enlightenment_remote -default-profile-set Standard-copy

Installation RAM Disk

If during the RAM Disk boot proccess a USB/MMC/SATA device is plugged in, the console login prompt might not appear.

Workaround 1: Press Enter key on the console until the login prompt appears.

Workaround 2: Recompile the CM-FX6 kernel with CONFIG_RCU_FAST_NO_HZ configuration option enabled.

@@ Line 5: / Line 5: @@
 enlightenment_remote -default-profile-set Standard-copy
 </pre>
+}}
+{{IssueCategory|Installation RAM Disk|
+* If during the RAM Disk boot proccess a USB/MMC/SATA device is plugged in, the console login prompt might not appear.
+:'''Workaround 1:''' Press '''Enter''' key on the console until the login prompt appears.
+:'''Workaround 2:''' Recompile the CM-FX6 kernel with '''CONFIG_RCU_FAST_NO_HZ''' configuration option enabled.
 }}
 [[Category:Linux|Known issues]]
 [[Category:CM-FX6|Linux: Known issues]]