UCM-iMX7: Evaluation Kit: Getting Started

SB-UCM top view

System setup

SB-UCM bottom view

UCM-iMX7 evaluation kit is preloaded with Debian Linux image for UCM-iMX7.

1. Connect a DVI/HDMI Display to HDMI connector J5 using a standard HDMI/DVI cable.
2. Connect a USB Keyboard to USB connector P6.
3. Make sure jumper E1 is not populated (default state).
4. Connect the standard USB cable (included) between your host PC and the evaluation kit micro-USB2.0 connector P7.
5. On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:

Baud Rate	Data Bits	Stop Bits	Parity	Flow Control
115200	8	1	none	none

Starting the system

1. Connect the DC 12V power supply adapter (included) to main DC power connector - J6.
2. Follow the messages in your terminal emulator program until you see the linux login prompt.
3. Use the credentials below to login.

• username: root
• password: 111111

In case no messages appear in your terminal emulation program, please refer to the detailed USB console guide.

What Next?

• UCM-iMX7 evaluation kit hardware guide
• UCM-iMX7 development resources