Difference between revisions of "UCM-iMX7 NXP i.MX7 SW Resources"
| Line 23: | Line 23: | ||
|} | |} | ||
</div> | </div> | ||
| + | |||
| + | __NOTOC__ | ||
| + | |||
| + | {{ChangelogRss| content= | ||
| + | ===== 04-Dec-2017, CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 / UCM-iMX7 Yocto Linux release 1.2.0 ===== | ||
| + | : Yocto 2.1 (Krogoth) Linux for UCM-iMX7 support: | ||
| + | : - Basic support for the UCM-iMX7 module as in Linux release 4.0 | ||
| + | : Automatic Installation System as in the Linux release 4.0 | ||
| + | : - Improved Automatic Installation Procedure | ||
| + | : - Add support for installing on eMMC and NAND flash | ||
| + | : Documentation | ||
| + | : - Initial Yocto Linux documentation for UCM-iMX7 | ||
| + | |||
| + | ===== 17-Sep-2017, CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 / UCM-iMX7 Linux release 4.0 ===== | ||
| + | : Linux kernel v4.1.15-cl-som-imx7-4.0 for UCM-iMX7 updates | ||
| + | : - Fixed PCIe reset | ||
| + | : - Enabled various config options | ||
| + | : Userspace updates: | ||
| + | : - Deploy new kernel, driver modules and device tree blobs | ||
| + | : - Install various packaged, e.g. pciutils, can-utils, wvdial and etc. | ||
| + | : Automatic Installation System | ||
| + | : - Improved Automatic Installation Procedure | ||
| + | : - Add support for installing on NAND flash | ||
| + | : Documentation | ||
| + | : - Updated multiple articles to comply with the new Linux package | ||
| + | |||
| + | ===== 18-Jun-2017, UCM-iMX7 Linux release 1.0 ===== | ||
| + | : Initial release of Linux kernel v4.1.15-ucm-imx7-1.0 and Debian 8 Linux Demo image for UCM-iMX7 | ||
| + | : - Basic support for the UCM-iMX7 module and SB-UCM base board | ||
| + | : - Serial console support on UART1 | ||
| + | : - Green LED | ||
| + | : - MMC/SD, eMMC, USB, I2C, SPI | ||
| + | : - Storage: NAND, SPI flash, MMC/SD, USB | ||
| + | : - Freescale Ethernet Controller (FEC1) | ||
| + | : - PCIe | ||
| + | : - TSC2046 resistive touch panel controller support | ||
| + | : - HannStar HSD050IDW1/Startek KD050C-1A LCD panel support | ||
| + | : - PWM backlight for LCD | ||
| + | : - DVI display | ||
| + | : - AB1805 RTC support | ||
| + | : - Analog Audio | ||
| + | : - BCM4343W WiFi and Bluetooth | ||
| + | : - 2x CAN bus (FLEXCAN1 and FLEXCAN2) | ||
| + | : - Watchdog WD1 | ||
| + | : Documentation | ||
| + | : - Initial Linux documentation for UCM-iMX7 support | ||
| + | }} | ||
| + | |||
| + | [[Category:UCM-iMX7]] | ||
| + | |||
__NOTOC__ | __NOTOC__ | ||
Revision as of 12:27, 5 July 2018
|
UCM-iMX7 is an ultra miniature computer-on-module (CoM) / system-on-module (SoM) board designed to serve as a building block in embedded applications. UCM-iMX7 is built around the NXP i.MX7 System-on-Chip featuring an advanced ARM Cortex-A7 CPU coupled with a dedicated real-time ARM Cortex-M4 MCU. The SoC is supplemented with up-to 2GB DDR3 and 32GB of on-board SLC NAND or eMMC storage. In addition, the UCM-iMX7 features extensive connectivity with a wide range of industry standard interfaces – GbE, WiFi, Bluetooth, PCIe, USB and CAN bus. UCM-iMX7 is provided with comprehensive documentation and full ready-to-run SW support for Linux. |
 |
