Difference between revisions of "CL-SOM-iMX8: Evaluation Kit: Getting Started"

Latest revision as of 10:41, 20 February 2020

Connect a DVI/HDMI Display to HDMI connector J2 using a standard HDMI/DVI cable.
Connect a USB Keyboard to USB connector U30.
Make sure jumpers E3, E9 and E11 are not populated.
Make sure jumpers E8 and E10 are populated (default state).
Connect a standard USB cable (included in the kit) between your host PC and the evaluation kit micro-USB2.0 connector P12.
On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:

Baud Rate Data Bits Stop Bits Parity Flow Control

115200 8 1 none none

More Details: Connector J2, Connector U30, Connector P12.

Connect the DC 12V power supply adapter (included) to main DC power connector J3.
The system will boot into Linux. Root auto-login is enabled on the serial console .

In case no messages appear in your terminal emulation program, please refer to the detailed USB console guide.

@@ Line 7: / Line 7: @@
 # Connect a DVI/HDMI Display to HDMI connector '''J2''' using a standard HDMI/DVI cable.
 # Connect a USB Keyboard to USB connector '''U30'''.
-# Make sure jumpers '''E3''', '''E8''' and '''E11''' are not populated.
+# Make sure jumpers '''E3''', '''E9''' and '''E11''' are not populated.
-# Make sure jumpers '''E9''' and '''E10''' are populated (default state).
+# Make sure jumpers '''E8''' and '''E10''' are populated (default state).
 # Connect a standard USB cable (included in the kit) between your host PC and the evaluation kit micro-USB2.0 connector '''P12'''.
 # On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings: