IOT-DIN-IMX8PLUS: Getting Started

Quick Setup

• Connect a USB cable between host PC and IOT-DIN-IMX8PLUS micro-USB console DBG connector.
• Insert the AC power-supply blade into the power supply unit.
• Insert the power supply plug into the IOT-DIN-IMX8PLUS DC input terminal block.
• On your host PC, start a terminal emulation program (such as Tera Term or PuTTy) with the following serial port settings:

Baud Rate	Data Bits	Stop Bits	Parity	Flow Control
115200	8	1	none	none

• Plug the power supply unit into an AC outlet. IOT-DIN-IMX8PLUS will turn on and boot into Linux.
• To login into Linux use "compulab" as username and set the password per first login instructions.

IOT-DIN-IMX8PLUS Overview

Front panel layout

Callout	Function
1	System status indicator. Dual-color blue/amber LED
2	USB 3.0 connector
3	User programmable LED A & LED B
4	User programmable recessed push-button
5	Ethernet ports, dual RJ45 connector
6	System reset push-button
7	Console connector, micro-USB type
8	Antenna A, SMA *
9	Industrial I/O terminal block, 16 pin, 16-26 AWG
10	Antenna B, SMA *
11	Power input connector

Additional Resources

• IOT-DIN-IMX8PLUS Debian Linux How-To Guide
• IOT-DIN-IMX8PLUS Resources