Difference between revisions of "IOT-GATE-IMX8PLUS: Getting Started"

From Compulab Mediawiki
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 4: Line 4:
 
* Insert the AC power-supply blade into the power supply unit.
 
* Insert the AC power-supply blade into the power supply unit.
 
* Insert the power supply plug into the IOT-GATE-IMX8PLUS DC input jack. Turn the power plug clockwise to lock the plug.
 
* Insert the power supply plug into the IOT-GATE-IMX8PLUS DC input jack. Turn the power plug clockwise to lock the plug.
* On your host PC, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
+
* On your host PC, start a terminal emulation program (such as Tera Term or PuTTy) with the following serial port settings:
 
<blockquote>
 
<blockquote>
 
{{:SB-SOM: serial port parameters table}}
 
{{:SB-SOM: serial port parameters table}}
Line 10: Line 10:
 
* Plug the power supply unit into an AC outlet. IOT-GATE-IMX8PLUS will turn on and boot into Linux.
 
* Plug the power supply unit into an AC outlet. IOT-GATE-IMX8PLUS will turn on and boot into Linux.
 
* To login into Linux use "compulab" as username and set the password per first login instructions.
 
* To login into Linux use "compulab" as username and set the password per first login instructions.
 +
{{Note| Initial login prompt is not accessible on HDMI monitor (GUI terminal)}}
  
 
= IOT-GATE-IMX8PLUS Overview =
 
= IOT-GATE-IMX8PLUS Overview =
Line 63: Line 64:
 
{{#ev:youtube|https://www.youtube.com/watch?v=x7mNuQcTtLU|400|inline|VESA / wall-mount bracket installation|frame}}
 
{{#ev:youtube|https://www.youtube.com/watch?v=x7mNuQcTtLU|400|inline|VESA / wall-mount bracket installation|frame}}
 
{{#ev:youtube|https://www.youtube.com/watch?v=1dszTXjgXqM|400|inline|DIN rail bracket installation|frame}}
 
{{#ev:youtube|https://www.youtube.com/watch?v=1dszTXjgXqM|400|inline|DIN rail bracket installation|frame}}
 +
{{#ev:youtube|https://www.youtube.com/watch?v=47YDwTBVdAM|400|inline|DIN rail bracket horizontal installation|frame}}
  
  
 
[[Category:IOT-GATE-IMX8PLUS]]
 
[[Category:IOT-GATE-IMX8PLUS]]

Latest revision as of 12:15, 23 July 2024

Quick Setup

  • Connect a USB cable between host PC and IOT-GATE-IMX8PLUS micro-USB console connector.
  • Insert the AC power-supply blade into the power supply unit.
  • Insert the power supply plug into the IOT-GATE-IMX8PLUS DC input jack. Turn the power plug clockwise to lock the plug.
  • On your host PC, start a terminal emulation program (such as Tera Term or PuTTy) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control
115200 8 1 none none
  • Plug the power supply unit into an AC outlet. IOT-GATE-IMX8PLUS will turn on and boot into Linux.
  • To login into Linux use "compulab" as username and set the password per first login instructions.
Admolition note.png Initial login prompt is not accessible on HDMI monitor (GUI terminal)

IOT-GATE-IMX8PLUS Overview

Front panel

Iot-gate-imx8plus front-panel.png

Back panel

Iot-gate-imx8plus back-panel.png

Left and Right panels

Iot-gate-imx8plus left-right-panel.png

Default antenna connector assignment

Connector Function
WiFi-A / BT Wifi / Bluetooth antenna
WiFi-B Secondary Wifi antenna
WWAN Main LTE antenna
AUX Auxiliary GNSS antenna

Service bay

Iot-gate-imx8plus service-bay.png

SIM card installation

  • Remove the screw from the SIM/PROG tray-cover
  • Insert a SIM removal tool into the cover popping hole to pop the tray-cover
  • Place the SIM into the tray
  • Carefully push the tray-cover back in
  • Close the SIM/PROG cover screw (optional)
Iot-gate-rpi4 sim-tray-cover.png

Additional Resources


Useful How-To Videos


I/O module replacement
VESA / wall-mount bracket installation
DIN rail bracket installation
DIN rail bracket horizontal installation