Difference between revisions of "CM-T3530: U-Boot: Known Issues"

Latest revision as of 17:14, 18 March 2014

Multiple environment storage devices

Workaround: Reset the module before booting Linux. This can be done using the reset button (SW2) or the U-Boot command reset.

@@ Line 1: / Line 1: @@
 {{IssueCategory|Multiple environment storage devices|
 * After using usb commands in U-Boot, Linux might fail to detect USB devices.
-: '''Workaround:''' Reset the module before booting Linux. This can be done using the power button or the U-Boot command {{cmd|reset}}.
+: '''Workaround:''' Reset the module before booting Linux. This can be done using the reset button (SW2) or the U-Boot command {{cmd|reset}}.
-* While using the CB-T3 baseboard or the SB-T35 baseboard, with alternate boot selected, and the MMC card is not present in the socket, the boot process will default to the CM-T3530 primary storage (NAND flash), but U-Boot will still expect to find the environment in the MMC card.
-: '''Workaround:''' Use the {{cmd|env device}} command to switch to the primary CM-T3530 storage:<pre>> env device nand import</pre>
 }}
 [[Category:U-Boot]]
 [[Category:CM-T3530]]