Difference between revisions of "CL-SOM-iMX7: Evaluation Kit: Getting Started"

From Compulab Mediawiki
Jump to: navigation, search
(→‎What Next?)
 
(→‎What Next?)
 
(3 intermediate revisions by one other user not shown)
Line 2: Line 2:
 
[[Image:SB_SOM_topview2.jpg|thumb|right|alt=SB-SOM top view|<div align="center">SB-SOM top view</div>]]
 
[[Image:SB_SOM_topview2.jpg|thumb|right|alt=SB-SOM top view|<div align="center">SB-SOM top view</div>]]
  
−
= System setup =
+
== System setup ==
 
[[Image:SB_SOM_bottomview2.jpg|thumb|right|alt=SB-SOM bottom view|<div align="center">SB-SOM bottom view</div>]]
 
[[Image:SB_SOM_bottomview2.jpg|thumb|right|alt=SB-SOM bottom view|<div align="center">SB-SOM bottom view</div>]]
 
CL-SOM-iMX7 evaluation kit is preloaded with [[CL-SOM-iMX7: Linux: Debian|Debian Linux image for CL-SOM-iMX7]].
 
CL-SOM-iMX7 evaluation kit is preloaded with [[CL-SOM-iMX7: Linux: Debian|Debian Linux image for CL-SOM-iMX7]].
 
# Connect a DVI/HDMI Display to HDMI connector '''J5''' using a standard HDMI/DVI cable.
 
# Connect a DVI/HDMI Display to HDMI connector '''J5''' using a standard HDMI/DVI cable.
 
# Connect a USB Keyboard to USB connector '''P6'''.
 
# Connect a USB Keyboard to USB connector '''P6'''.
−
# Make sure jumpers <!-- [[SB-SOM:_Jumpers:_E3|E3]] -->'''E7''', '''E3''' and <!-- [[SB-SOM:_Jumpers:_E1|E1]] --> '''E1''' are not populated (default state).
+
# Make sure jumpers '''E7''', '''E3''' and '''E1''' are not populated (default state).
−
# Connect the standard USB cable (included) between your host PC and the evaluation kit micro-USB2.0 connector <!-- [[SB-SOM:_Connectors:_P7|P7]] --> '''P7'''.
+
# Connect the standard USB cable (included) between your host PC and the evaluation kit micro-USB2.0 connector '''P7'''.
 
# On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
 
# On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
 
<blockquote>
 
<blockquote>
Line 14: Line 14:
 
</blockquote>
 
</blockquote>
  
−
= Starting the system =
+
'''More Details:''' ''[[SB-SOM:_Connectors:_P6|Connector P6]]'', ''[[SB-SOM:_Connectors:_J5|Connector J5]]'', ''[[SB-SOM:_Connectors:_P7|Connector P7]]''<!--, ''[[SB-SOM:_Jumpers:_E3|E3]]'', ''[[SB-SOM:_Jumpers:_E7|E7]]'', ''[[SB-SOM:_Jumpers:_E1|E1]]''-->.
−
# Connect the DC 12V power supply adapter (included) to <!-- [[SB-SOM:_Connectors:_J6_and_J8|main DC power connector - J6]] --> '''J6'''.
+
 
 +
== Starting the system ==
 +
# Connect the DC 12V power supply adapter (included) to main DC power connector - '''J6'''.
 
# Follow the messages in your terminal emulator program until you see the linux login prompt.  
 
# Follow the messages in your terminal emulator program until you see the linux login prompt.  
−
# '''NOTE:''' in case no messages appear in your terminal emulation program, please refer to the detailed [[SB-SOM: HOWTO: USB Console|USB console]] guide.
 
 
# Use the credentials below to login.
 
# Use the credentials below to login.
 
:* username: root
 
:* username: root
 
:* password: 111111
 
:* password: 111111
 +
{{note|In case no messages appear in your terminal emulation program, please refer to the detailed [[SB-SOM: HOWTO: USB Console|USB console]] guide.}}
 +
 +
'''More Details:''' ''[[SB-SOM: Connectors: J6 and J8|Connector J6]]''.
  
−
= What Next? =
+
== What Next? ==
−
*[[CL-SOM-iMX7 Freescale i.MX7 Linux|CL-SOM-iMX7 Linux guide]]
+
* [[CL-SOM-iMX7 NXP i.MX7 U-Boot|CL-SOM-iMX7 U-Boot guide]]
−
<!-- *[[CL-SOM-iMX7 Freescale i.MX7 Yocto Linux|CL-SOM-iMX7 Yocto guide]] -->
+
* [[CL-SOM-iMX7 Freescale i.MX7 Linux|CL-SOM-iMX7 Linux guide]]
−
<!-- *[[CL-SOM-iMX7: Evaluation Kit: Hardware Guide|CL-SOM-iMX7 evaluation kit hardware guide]] -->
+
* [[CL-SOM-iMX7 NXP i.MX7 Yocto Linux|CL-SOM-iMX7 Yocto guide]]
−
*[http://www.compulab.co.il/products/computer-on-modules/CL-SOM-iMX7/#devres CL-SOM-iMX7 development resources]
+
* [[CL-SOM-iMX7 NXP i.MX7 FreeRTOS|CL-SOM-iMX7 FreeRTOS guide]]
 +
* [[CL-SOM-iMX7: Evaluation Kit: Hardware Guide|CL-SOM-iMX7 evaluation kit hardware guide]]
 +
* [http://www.compulab.com/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/#devres CL-SOM-iMX7 development resources]
  
 
[[Category:SB-SOM]]
 
[[Category:SB-SOM]]
 
[[Category:CL-SOM-iMX7]]
 
[[Category:CL-SOM-iMX7]]

Latest revision as of 15:37, 11 July 2017

CL-SOM-iMX7-eval-kit-quick-setup.jpg

SB-SOM top view
SB-SOM top view

System setup

SB-SOM bottom view
SB-SOM bottom view

CL-SOM-iMX7 evaluation kit is preloaded with Debian Linux image for CL-SOM-iMX7.

  1. Connect a DVI/HDMI Display to HDMI connector J5 using a standard HDMI/DVI cable.
  2. Connect a USB Keyboard to USB connector P6.
  3. Make sure jumpers E7, E3 and E1 are not populated (default state).
  4. Connect the standard USB cable (included) between your host PC and the evaluation kit micro-USB2.0 connector P7.
  5. On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control
115200 8 1 none none

More Details: Connector P6, Connector J5, Connector P7.

Starting the system

  1. Connect the DC 12V power supply adapter (included) to main DC power connector - J6.
  2. Follow the messages in your terminal emulator program until you see the linux login prompt.
  3. Use the credentials below to login.
  • username: root
  • password: 111111
Admolition note.png In case no messages appear in your terminal emulation program, please refer to the detailed USB console guide.

More Details: Connector J6.

What Next?

Retrieved from "https://mediawiki.compulab.com/w/index.php?title=CL-SOM-iMX7:_Evaluation_Kit:_Getting_Started&oldid=3400"