Difference between revisions of "CL-SOM-iMX6UL: Evaluation Kit: Getting Started"
(→What Next?) |
(→What Next?) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 4: | Line 4: | ||
== System setup == | == System setup == | ||
[[Image:SB_SOM_bottomview2.jpg|thumb|right|alt=SB-SOM bottom view|<div align="center">SB-SOM bottom view</div>]] | [[Image:SB_SOM_bottomview2.jpg|thumb|right|alt=SB-SOM bottom view|<div align="center">SB-SOM bottom view</div>]] | ||
| − | CL-SOM-iMX6 evaluation kit is preloaded with [[CL-SOM-iMX6UL | + | CL-SOM-iMX6 evaluation kit is preloaded with [[CL-SOM-iMX6UL Freescale i.MX6UL Yocto Linux|Yocto Linux image for CL-SOM-iMX6UL]]. |
# Connect a DVI/HDMI Display to HDMI connector '''J5''' using a standard HDMI/DVI cable. | # Connect a DVI/HDMI Display to HDMI connector '''J5''' using a standard HDMI/DVI cable. | ||
# Connect a USB Keyboard to USB connector '''P6'''. | # Connect a USB Keyboard to USB connector '''P6'''. | ||
| Line 27: | Line 27: | ||
== What Next? == | == What Next? == | ||
| − | * [[CL-SOM-iMX6UL | + | * [[CL-SOM-iMX6UL Freescale i.MX6UL Yocto Linux|CL-SOM-iMX6UL Yocto Linux guide]] |
* [[CL-SOM-iMX6UL Freescale i.MX6UL Linux|CL-SOM-iMX6UL Linux guide]] | * [[CL-SOM-iMX6UL Freescale i.MX6UL Linux|CL-SOM-iMX6UL Linux guide]] | ||
| − | |||
* [[CL-SOM-iMX6UL:_Evaluation_Kit:_Hardware_Guide|CL-SOM-iMX6UL evaluation kit hardware guide]] | * [[CL-SOM-iMX6UL:_Evaluation_Kit:_Hardware_Guide|CL-SOM-iMX6UL evaluation kit hardware guide]] | ||
| − | + | * [http://www.compulab.com/products/computer-on-modules/cl-som-imx6ul-freescale-imx6-ultralite-system-on-module/#devres CL-SOM-iMX6UL development resources] | |
| − | * [http://www.compulab. | ||
[[Category:SB-SOM]] | [[Category:SB-SOM]] | ||
[[Category:CL-SOM-iMX6UL]] | [[Category:CL-SOM-iMX6UL]] | ||
Latest revision as of 12:52, 27 March 2017
System setup
CL-SOM-iMX6 evaluation kit is preloaded with Yocto Linux image for CL-SOM-iMX6UL.
- Connect a DVI/HDMI Display to HDMI connector J5 using a standard HDMI/DVI cable.
- Connect a USB Keyboard to USB connector P6.
- Make sure jumpers E7, E3 and E1 are not populated (default state).
- Connect the standard USB cable (included) between your host PC and the evaluation kit micro-USB2.0 connector P7.
- On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control 115200 8 1 none none
More Details: Connector P6, Connector J5, Connector P7.
Starting the system
- Connect the DC 12V power supply adapter (included) to main DC power connector - J6.
- Follow the messages in your terminal emulator program until you see the linux login prompt.
- Use the credentials below to login.
- username: root
- password: 111111
|
In case no messages appear in your terminal emulation program, please refer to the detailed USB console guide. |
More Details: Connector J6.
