Difference between revisions of "CL-SOM-iMX7: Evaluation Kit: Getting Started"
(→What Next?) |
(→What Next?) |
||
| Line 27: | Line 27: | ||
== What Next? == | == What Next? == | ||
| + | * [[CL-SOM-iMX7 NXP i.MX7 U-Boot|CL-SOM-iMX7 U-Boot guide]] | ||
* [[CL-SOM-iMX7 Freescale i.MX7 Linux|CL-SOM-iMX7 Linux guide]] | * [[CL-SOM-iMX7 Freescale i.MX7 Linux|CL-SOM-iMX7 Linux guide]] | ||
* [[CL-SOM-iMX7 NXP i.MX7 Yocto Linux|CL-SOM-iMX7 Yocto guide]] | * [[CL-SOM-iMX7 NXP i.MX7 Yocto Linux|CL-SOM-iMX7 Yocto guide]] | ||
| + | * [[CL-SOM-iMX7 NXP i.MX7 FreeRTOS|CL-SOM-iMX7 FreeRTOS guide]] | ||
* [[CL-SOM-iMX7: Evaluation Kit: Hardware Guide|CL-SOM-iMX7 evaluation kit hardware guide]] | * [[CL-SOM-iMX7: Evaluation Kit: Hardware Guide|CL-SOM-iMX7 evaluation kit hardware guide]] | ||
* [http://www.compulab.com/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/#devres CL-SOM-iMX7 development resources] | * [http://www.compulab.com/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/#devres CL-SOM-iMX7 development resources] | ||
Latest revision as of 15:37, 11 July 2017
System setup
CL-SOM-iMX7 evaluation kit is preloaded with Debian Linux image for CL-SOM-iMX7.
- Connect a DVI/HDMI Display to HDMI connector J5 using a standard HDMI/DVI cable.
- Connect a USB Keyboard to USB connector P6.
- Make sure jumpers E7, E3 and E1 are not populated (default state).
- Connect the standard USB cable (included) between your host PC and the evaluation kit micro-USB2.0 connector P7.
- On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control 115200 8 1 none none
More Details: Connector P6, Connector J5, Connector P7.
Starting the system
- Connect the DC 12V power supply adapter (included) to main DC power connector - J6.
- Follow the messages in your terminal emulator program until you see the linux login prompt.
- Use the credentials below to login.
- username: root
- password: 111111
|
In case no messages appear in your terminal emulation program, please refer to the detailed USB console guide. |
More Details: Connector J6.
