Difference between revisions of "Transclusion: Debian: CL-SOM-iMX7: WiFi"
(→WiFi Initialization) |
(→wpa_supplicant) |
||
| Line 38: | Line 38: | ||
==== wpa_supplicant ==== | ==== wpa_supplicant ==== | ||
* Configuration sample | * Configuration sample | ||
| − | {{cmd|wpa_supplicant}} | + | Please open a {{cmd|wpa_supplicant}} configuration file bellow and put a network name and a password into the "ssid" and "psk" fields respectively. |
| − | |||
| − | |||
<pre> | <pre> | ||
| − | root@cl-rootfs:~# cat | + | root@cl-rootfs:~# cat /etc/wpa_supplicant.conf |
ctrl_interface=/var/run/wpa_supplicant | ctrl_interface=/var/run/wpa_supplicant | ||
| Line 50: | Line 48: | ||
psk="wireless_network_password" | psk="wireless_network_password" | ||
} | } | ||
| − | |||
</pre> | </pre> | ||
* Sample run | * Sample run | ||
Latest revision as of 08:11, 22 August 2017
CL-SOM-iMX7 features 802.11b/g/n wireless connectivity solution, implemented with a TI WiLink8 Combo module.
WiFi Initialization
- WiFi requires no user interaction for being configured. The driver gets loaded automatically.
Make sure that the WiFi driver is loaded:
root@cl-rootfs:~# lsmod | grep wl18xx wl18xx 70950 0
The WiFi driver can be loaded manually:
root@cl-rootfs:~# modprobe wl18xx wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2 wlcore: WARNING falling back to default config wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) wlcore: loaded
- iwconfig command from wireless-tools package can be used to retrieve detailed information about the WiFi interfaces:
root@cl-rootfs:~# iwconfig wlan0
wlan0 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
- Activate the interface:
root@cl-rootfs:~# ifconfig wlan0 up
- Sample WiFi scanning:
root@cl-rootfs:~# iwlist wlan0 scan
The output will show the list of Access Points and Ad-Hoc cells in range. For more information about connecting to wireless networks and tuning WiFi interfaces refer to “wpa_supplicant” and “wireless-tools” man pages.
wpa_supplicant
- Configuration sample
Please open a wpa_supplicant configuration file bellow and put a network name and a password into the "ssid" and "psk" fields respectively.
root@cl-rootfs:~# cat /etc/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="wireless_network_name"
key_mgmt=WPA-PSK
psk="wireless_network_password"
}
- Sample run
root@cl-rootfs:~# ifconfig wlan0 up root@cl-rootfs:~# wpa_supplicant -B -Dwext -c /etc/wpa_supplicant.conf -i wlan0 root@cl-rootfs:~# dhclient wlan0
