Difference between revisions of "IOT-GATE-RPI5: OS Configuration Layer"
(Created page with "== Overview == IOT-GATE-RPI5 runs standard [https://www.raspberrypi.com/software/operating-systems/ Raspberry Pi OS] with an additional IOT-GATE-RPI5 OS Configuration Layer th...") |
|||
| Line 2: | Line 2: | ||
IOT-GATE-RPI5 runs standard [https://www.raspberrypi.com/software/operating-systems/ Raspberry Pi OS] with an additional IOT-GATE-RPI5 OS Configuration Layer that sets-up the gateway peripheral devices and provides useful tools for device configuration and management.<br> | IOT-GATE-RPI5 runs standard [https://www.raspberrypi.com/software/operating-systems/ Raspberry Pi OS] with an additional IOT-GATE-RPI5 OS Configuration Layer that sets-up the gateway peripheral devices and provides useful tools for device configuration and management.<br> | ||
This article provides instructions needed to install IOT-GATE-RPI5 OS Configuration Layer onto the Compulab IOT-GATE-RPI5 that runs standard Raspberry Pi OS.<br> | This article provides instructions needed to install IOT-GATE-RPI5 OS Configuration Layer onto the Compulab IOT-GATE-RPI5 that runs standard Raspberry Pi OS.<br> | ||
| − | IOT-GATE-RPI5 OS Configuration Layer is | + | The IOT-GATE-RPI5 OS Configuration Layer is distributed as a set of Debian packages: |
| + | * '''iot-gate-rpi5-firmware''' - pre-built Device Tree Blobs (DTBs) and Device Tree Overlays (DTBOs) for the IOT-GATE-RPI5 platform | ||
| + | * '''iot-gate-rpi5-config''' - configuration and management suite providing support for IOT-GATE-RPI5 peripherals and Industrial I/O interfaces | ||
| + | Upgrading a standard Raspberry Pi OS installation with the IOT-GATE-RPI5 OS Configuration Layer is as simple as downloading and extracting the ZIP archive, then installing the Debian packages. | ||
== Downloading == | == Downloading == | ||
Use the following command to download and extract IOT-GATE-RPI5 OS configuration layer package archive: | Use the following command to download and extract IOT-GATE-RPI5 OS configuration layer package archive: | ||
<pre> | <pre> | ||
| − | pi@raspberrypi:~$ sudo wget https://www.compulab.com/wp-content/uploads/2026/ | + | pi@raspberrypi:~$ sudo wget https://www.compulab.com/wp-content/uploads/2026/09/iotg-rpi5_os-config-layer_2026-09-02.zip -P /opt |
... | ... | ||
| − | pi@raspberrypi:~$ sudo unzip /opt/iotg-rpi5_os-config-layer_2026- | + | pi@raspberrypi:~$ sudo unzip /opt/iotg-rpi5_os-config-layer_2026-09-02.zip -d /opt |
</pre> | </pre> | ||
== Installation == | == Installation == | ||
| − | Install ''iot-gate-rpi5-config'' package | + | * Install the ''iot-gate-rpi5-firmware'' package: |
| − | <pre> | + | :<pre>pi@raspberrypi:~$ sudo apt update && sudo apt install /opt/iot-gate-rpi5-firmware_1.0.2_arm64.deb</pre> |
| − | pi@raspberrypi:~$ sudo apt update && sudo apt install /opt/iot-gate-rpi5-config_1.0. | + | * Install the ''iot-gate-rpi5-config'' package: |
| − | </pre> | + | :<pre>pi@raspberrypi:~$ sudo apt update && sudo apt install /opt/iot-gate-rpi5-config_1.0.2_all.deb</pre> |
== After installation == | == After installation == | ||
Latest revision as of 19:21, 4 September 2026
Overview
IOT-GATE-RPI5 runs standard Raspberry Pi OS with an additional IOT-GATE-RPI5 OS Configuration Layer that sets-up the gateway peripheral devices and provides useful tools for device configuration and management.
This article provides instructions needed to install IOT-GATE-RPI5 OS Configuration Layer onto the Compulab IOT-GATE-RPI5 that runs standard Raspberry Pi OS.
The IOT-GATE-RPI5 OS Configuration Layer is distributed as a set of Debian packages:
- iot-gate-rpi5-firmware - pre-built Device Tree Blobs (DTBs) and Device Tree Overlays (DTBOs) for the IOT-GATE-RPI5 platform
- iot-gate-rpi5-config - configuration and management suite providing support for IOT-GATE-RPI5 peripherals and Industrial I/O interfaces
Upgrading a standard Raspberry Pi OS installation with the IOT-GATE-RPI5 OS Configuration Layer is as simple as downloading and extracting the ZIP archive, then installing the Debian packages.
Downloading
Use the following command to download and extract IOT-GATE-RPI5 OS configuration layer package archive:
pi@raspberrypi:~$ sudo wget https://www.compulab.com/wp-content/uploads/2026/09/iotg-rpi5_os-config-layer_2026-09-02.zip -P /opt ... pi@raspberrypi:~$ sudo unzip /opt/iotg-rpi5_os-config-layer_2026-09-02.zip -d /opt
Installation
- Install the iot-gate-rpi5-firmware package:
pi@raspberrypi:~$ sudo apt update && sudo apt install /opt/iot-gate-rpi5-firmware_1.0.2_arm64.deb
- Install the iot-gate-rpi5-config package:
pi@raspberrypi:~$ sudo apt update && sudo apt install /opt/iot-gate-rpi5-config_1.0.2_all.deb
After installation
- Reboot IOT-GATE-RPI5
