Difference between revisions of "CM-FX6: Linux: Known Issues"

Revision as of 07:43, 21 February 2014

Enlightenment Window Manager

If the Touchscreen profile is selected the Settings Panel doesn't have Profiles setting menu. It is not possible to switch the profile.

Workaround : Launch the xterm from Applications->Accessories and change the default profile from the command line:

enlightenment_remote -default-profile-set Standard-copy

Startek LCD

If the Evaluation kit is supplied with Startek KD050C LCD, the graphical output on the LCD may not appear correctly.

Workaround :

The next Linux package release for CM-FX6 will include support for Startek KD050C LCD.

@@ Line 5: / Line 5: @@
 enlightenment_remote -default-profile-set Standard-copy
 </pre>
+}}
+{{IssueCategory|Startek LCD|
+* If the Evaluation kit is supplied with '''Startek KD050C LCD''', the graphical output on the LCD may not appear correctly.
+:'''Workaround :'''
+:* Download an updated kernel version from: http://utilite-computer.com/download/utilite/unofficial_unsupported/linux-3.0.35-cm-fx6-5.4.tar.bz2
+:* Check that download succeeded using md5 check sum: http://utilite-computer.com/download/utilite/unofficial_unsupported/linux-3.0.35-cm-fx6-5.4.tar.bz2.md5
+:* Use the downloaded kernel instead of the one in the official Linux package for CM-FX6.
+* The next Linux package release for CM-FX6 will include support for Startek KD050C LCD.
 }}
 [[Category:Linux|Known issues]]
 [[Category:CM-FX6|Linux: Known issues]]