Difference between revisions of "IOT-GATE-IMX8PLUS: Getting Started"
(Created page with "= Quick Setup = * Connect a USB cable between host PC and IOT-GATE-IMX8PLUS micro-USB console connector. * Insert the AC power-supply blade into the power supply unit. * Inse...") |
(→Quick Setup) |
||
| Line 9: | Line 9: | ||
</blockquote> | </blockquote> | ||
* Plug the power supply unit into an AC outlet. IOT-GATE-IMX8PLUS will turn on and boot into Linux. | * Plug the power supply unit into an AC outlet. IOT-GATE-IMX8PLUS will turn on and boot into Linux. | ||
| − | * | + | * To login into Linux use "compulab" as username and set the password per first login instructions. |
= IOT-GATE-IMX8PLUS Overview = | = IOT-GATE-IMX8PLUS Overview = | ||
Revision as of 16:24, 4 July 2022
Contents
Quick Setup
- Connect a USB cable between host PC and IOT-GATE-IMX8PLUS micro-USB console connector.
- Insert the AC power-supply blade into the power supply unit.
- Insert the power supply plug into the IOT-GATE-IMX8PLUS DC input jack. Turn the power plug clockwise to lock the plug.
- On your host PC, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control 115200 8 1 none none
- Plug the power supply unit into an AC outlet. IOT-GATE-IMX8PLUS will turn on and boot into Linux.
- To login into Linux use "compulab" as username and set the password per first login instructions.
IOT-GATE-IMX8PLUS Overview
Front panel
Back panel
Left and Right panels
Default antenna connector assignment
| Connector | Function |
| WiFi-A / BT | Wifi / Bluetooth antenna |
| WiFi-B | Secondary Wifi antenna |
| WWAN | Main LTE antenna |
| AUX | Auxiliary GNSS antenna |
Service bay
SIM card installation
- Remove the screw from the SIM/PROG tray-cover
- Insert a SIM removal tool into the cover popping hole to pop the tray-cover
- Place the SIM into the tray
- Carefully push the tray-cover back in
- Close the SIM/PROG cover screw (optional)
