Difference between revisions of "CL-SOM-iMX6UL: Evaluation Kit: Getting Started"

Revision as of 14:07, 11 July 2016

SB-SOM top view

SB-SOM bottom view

CL-SOM-iMX6 evaluation kit is preloaded with Yocto Linux image for CL-SOM-iMX6UL.

Connect a DVI/HDMI Display to HDMI connector J5 using a standard HDMI/DVI cable.
Connect a USB Keyboard to USB connector P6.
Make sure jumpers E7, E3 and E1 are not populated (default state).
Connect the standard USB cable (included) between your host PC and the evaluation kit micro-USB2.0 connector P7.
On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:

Baud Rate Data Bits Stop Bits Parity Flow Control

115200 8 1 none none

More Details: Connector P6, Connector J5, Connector P7.

Connect the DC 12V power supply adapter (included) to main DC power connector - J6.
Follow the messages in your terminal emulator program until you see the linux login prompt.
Use the credentials below to login.

In case no messages appear in your terminal emulation program, please refer to the detailed USB console guide.

More Details: Connector J6.

@@ Line 29: / Line 29: @@
 * [[CL-SOM-iMX6UL Freescale i.MX6UL Yocto Linux|CL-SOM-iMX6UL Yocto Linux guide]]
 * [[CL-SOM-iMX6UL Freescale i.MX6UL Linux|CL-SOM-iMX6UL Linux guide]]
-<!--
 * [[CL-SOM-iMX6UL:_Evaluation_Kit:_Hardware_Guide|CL-SOM-iMX6UL evaluation kit hardware guide]]
--->
 * [http://www.compulab.co.il/products/computer-on-modules/cl-som-imx6ul-freescale-imx6-ultralite-system-on-module/#devres CL-SOM-iMX6UL development resources]
 [[Category:SB-SOM]]
 [[Category:CL-SOM-iMX6UL]]