Difference between revisions of "Transclusion: IOT-GATE-iMX8: RS485 / RS232"
imported>Uri.mashiach (Created page with "IOT-GATE-iMX8 / SBC-IOT-iMX8 features a half-duplex RS485 port.<br> The RS485 interface is routed to rear panel terminal block connector ([http://192.168.10.106/mediawiki/inde...") |
imported>Igor.vaisbein (→RS485 / RS232 Selection) |
||
| Line 1: | Line 1: | ||
| − | IOT-GATE-iMX8 / SBC-IOT-iMX8 features a half-duplex RS485 | + | IOT-GATE-iMX8 / SBC-IOT-iMX8 features a RS485 / RS232 port. Only half-duplex mode is supported for the RS485.<br> |
| − | The RS485 interface is routed to rear panel terminal block connector ([http://192.168.10.106/mediawiki/index.php/IOT-GATE-iMX8:_Getting_Started#Front_and_Rear_panels see drawing]).<br> | + | The RS485 / RS232 interface is routed to rear panel terminal block connector ([http://192.168.10.106/mediawiki/index.php/IOT-GATE-iMX8:_Getting_Started#Front_and_Rear_panels see drawing]).<br> |
| − | RS485 / RS232 connector pin-out | + | RS485 / RS232 connector pin-out: |
{| width="40%" cellspacing="1" cellpadding="1" border="1" | {| width="40%" cellspacing="1" cellpadding="1" border="1" | ||
| Line 7: | Line 7: | ||
| align="center" | '''Pin Number''' | | align="center" | '''Pin Number''' | ||
| align="center" | '''RS485 Functionality''' | | align="center" | '''RS485 Functionality''' | ||
| + | | align="center" | '''RS232 Functionality''' | ||
|- valign="top" | |- valign="top" | ||
| 1 | | 1 | ||
| NEG A/- | | NEG A/- | ||
| + | | TXD | ||
|- | |- | ||
| 2 | | 2 | ||
| NEG B/+ | | NEG B/+ | ||
| + | | RTS | ||
|- | |- | ||
| 3 | | 3 | ||
| + | | Ground | ||
| Ground | | Ground | ||
| + | |- | ||
| + | | 4 | ||
| + | | NC | ||
| + | | CTS | ||
| + | |- | ||
| + | | 5 | ||
| + | | NC | ||
| + | | RXD | ||
|- | |- | ||
| 6 | | 6 | ||
| + | | Ground | ||
| Ground | | Ground | ||
|- | |- | ||
|} | |} | ||
| + | |||
| + | == RS485 / RS232 Mode Selection == | ||
| + | The UART mode is stored in the U-Boot environment.<br> | ||
| + | U-Boot environmnet commands are used to set/get the UART mode. | ||
| + | === Set RS485 mode === | ||
| + | <pre> | ||
| + | root@iot-gate-imx8:~# cl_setenv uart_mode rs485 | ||
| + | root@iot-gate-imx8:~# reboot | ||
| + | </pre> | ||
| + | === Set RS232 mode === | ||
| + | <pre> | ||
| + | root@iot-gate-imx8:~# cl_setenv uart_mode rs232 | ||
| + | root@iot-gate-imx8:~# reboot | ||
| + | </pre> | ||
| + | === Get UART mode === | ||
| + | <pre> | ||
| + | root@iot-gate-imx8:~# fw_printenv uart_mode | ||
| + | </pre> | ||
== Example == | == Example == | ||
Revision as of 11:05, 23 December 2020
IOT-GATE-iMX8 / SBC-IOT-iMX8 features a RS485 / RS232 port. Only half-duplex mode is supported for the RS485.
The RS485 / RS232 interface is routed to rear panel terminal block connector (see drawing).
RS485 / RS232 connector pin-out:
| Pin Number | RS485 Functionality | RS232 Functionality |
| 1 | NEG A/- | TXD |
| 2 | NEG B/+ | RTS |
| 3 | Ground | Ground |
| 4 | NC | CTS |
| 5 | NC | RXD |
| 6 | Ground | Ground |
Contents
RS485 / RS232 Mode Selection
The UART mode is stored in the U-Boot environment.
U-Boot environmnet commands are used to set/get the UART mode.
Set RS485 mode
root@iot-gate-imx8:~# cl_setenv uart_mode rs485 root@iot-gate-imx8:~# reboot
Set RS232 mode
root@iot-gate-imx8:~# cl_setenv uart_mode rs232 root@iot-gate-imx8:~# reboot
Get UART mode
root@iot-gate-imx8:~# fw_printenv uart_mode
Example
Serial terminal emulator application can be used to test the RS485 port.
- Use the following command to start Minicom with the user space device of the RS485 (/dev/ttymxc0).
root@iot-gate-imx8:~# minicom -D /dev/ttymxc0
- Follow the following steps to disable hardware flow control
- Open the menu "Configure Minicom" with CTRL-a followed by the letter 'o'.
- Select "Serial port setup"
- Press the letter 'f'.
- Press the Esc key twice.
- The characters that are typed in the terminal are transmitted to the RS485 port.
- The characters that are received from the RS485 port are displayed in the terminal.
- Press CTRL-a followed by the letter 'x' to exit from Minicom
