U-Boot for CM-X300

The CompuLab CM-X300 module is using U-Boot boot-loader for low-level initializations and operating system loading. U-Boot is an open source firmware for wide range of embedded systems (e.g. PowerPC, ARM, MIPS, x86, ColdFire, AVR32, NIOS, etc.). On this page we will discuss only features and use cases related to CompuLab CM-X300 module. For more information on U-Boot, please refer to Official U-Boot Homepage. The most recent CompuLab U-Boot version for CM-X300 is checked out from v2009.03 of Das U-Boot repository and can be obtained from CompuLab website in binary form. CompuLab U-Boot source will be provided on request. Links to information about U-Boot package for CM-X300 modules: CM-X300 U-Boot Update U-Boot quick reference U-Boot images U-Boot documentation

News

2-Sep-2009 U-Boot 2009.03-cm-x300-3 release - Added PXA310 USB support - Green LED (for CM-X300 revision 1.3 and higher) 27-May-2009 Initial release of U-Boot for CM-X300 documentation U-Boot 2009.03-cm-x300-2 release supports: - DA9030 power management chip - DM9000A Ethernet chip - PXA300 USB - Onboard NAND chip - Green LED (up to CM-X300 revision 1.2) - System revision and serial number in ATAGS