IOT-GATE-RPI4 OS Configuration Layer

From Compulab Mediawiki
Revision as of 13:24, 10 December 2022 by Igor (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Overview

IOT-GATE-RPI4 runs standard Raspberry Pi OS with an additional IOT-GATE-RPI4 OS Configuration Layer that sets-up the gateway peripheral devices and provides useful tools for device configuration and management.
This article provides instructions needed to install IOT-GATE-RPI4 OS Configuration Layer onto the Compulab IOT-GATE-RPI4 that runs standard Raspberry Pi OS.
IOT-GATE-RPI4 OS Configuration Layer is supplied as deb package named iotg-rpi4-config. Upgrading a standard Raspberry Pi OS with IOT-GATE-RPI4 OS Configuration Layer is as simple as downloading and installing deb package.

Downloading

Use the following command to download and extract IOT-GATE-RPI4 OS configuration layer package archive: 

pi@raspberrypi:~$ sudo wget https://www.compulab.com/wp-content/uploads/2022/04/iotg-rpi4_os-config-layer.zip -P /opt
...
pi@raspberrypi:~$ sudo unzip /opt/iotg-rpi4_os-config-layer.zip -d /opt

Installation

Install iotg-rpi4-config package by using the command: 

pi@raspberrypi:~$ sudo apt update && sudo apt install /opt/iotg-rpi4-config_1.3-1_all.deb

After installation

  • Reboot IOT-GATE-RPI4
Retrieved from "https://mediawiki.compulab.com/w/index.php?title=IOT-GATE-RPI4_OS_Configuration_Layer&oldid=5065"