Transclusion: Debian: CL-SOM-iMX7: Bluetooth

CL-SOM-iMX7 features Bluetooth 4.1 BLE interface, implemented with a TI WiLink8 Combo module.

Host Controller Interface (HCI) Initialization

• HCI requires no user interaction for being configured. The driver gets loaded automatically unless this option has been disabled by putting a black list rule for this device.
  

Make sure that the Bluetooth driver is loaded:

root@cl-rootfs:~# lsmod | grep btwilink
btwilink                3822  0

The Bluetooth driver can be loaded manually:

root@cl-rootfs:~# modprobe btwilink

• HCI device configuration utility can be run to retrieve detailed information about the Bluetooth interfaces:

root@cl-rootfs:~# hciconfig hci0 -a
hci0:   Type: BR/EDR  Bus: UART
        BD Address: 74:DA:EA:F9:CE:E3  ACL MTU: 1021:6  SCO MTU: 180:4
        UP RUNNING 
        RX bytes:636 acl:0 sco:0 events:39 errors:0
        TX bytes:1234 acl:0 sco:0 commands:39 errors:0
        Features: 0xff 0xfe 0x2d 0xfe 0xdb 0xff 0x7b 0x87
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
        Link policy: RSWITCH HOLD SNIFF 
        Link mode: SLAVE ACCEPT 
        Name: 'BlueZ 5.36'
        Class: 0x000000
        Service Classes: Unspecified
        Device Class: Miscellaneous, 
        HCI Version: 4.1 (0x7)  Revision: 0x0
        LMP Version: 4.1 (0x7)  Subversion: 0xac03
        Manufacturer: Texas Instruments Inc. (13)

• If the HCI device is not running, use the below command to enable the HCI device:

root@cl-rootfs:~# hciconfig hci0 up

• HCI Inquire remote devices.

root@cl-rootfs:~# hcitool scan
Scanning ...