Overview
- The Linux Package for CM-iTC includes a ready-to-run image that can be installed on SD-Card, attached SATA or USB storage device
- Download and unzip the Linux Package for CM-iTC to the host PC
- Ensure the integrity of the file:
$ md5sum cm-itc_linux_2013-03-14.zip
86be3f28c6a11b8f7f19e12686601467 cm-itc_linux_2013-03-14.zip
Installation
- Prepare either an SD Card, a SATA disk or a USB storage device. It must have at least 8GB capacity.
- Connect the storage device to the host PC.
- Assuming your storage device was detected as /dev/sdb write the image on it:
$ gzip -dc /path/to/itc-linux/itc.mint13.8GB.dd.gz | sudo dd of=/dev/sdb bs=1MB
- Connect the storage device to the CM-iTC and boot.
Welcome to Linux Mint 13 LTS
- On first boot choose your language, timezone, username, password etc.
See also
