- Initial release of Linux documentation for SBC-FITPC2
- Updates for Linux kernel and Debian filesystem image for CM-X300
- Initial release of Linux kernel 2.6.30 for Exeda
- Initial release of Android 1.0 for Exeda
- Added U-Boot for CM-X300 documentation
- Updates and fixes for Angstrom Linux for EM-X270
- Updates and fixes for Linux kernel 2.6.24
- Linux kernel updated to 2.6.24
- Added support for GeodeLX video input port
- All Gentoo packages updated to recent versions
- Initial release of Linux package for CM-X300
- Released Linux kernel 2.6.24 for CM-X270
- Updated Debian filesystem image
- Preliminary release of Linux kernel 2.6.24 for CM-X270 is available (source code only).
- Added wireless support (Ralink RT73 chipset)
- Added support for custom resolution displays
- All Gentoo packages updated to recent versions
- Added Wireless LAN driver
- Added partitions on EM-X270 NOR flash
- Added support for VGA display
- Added support for GPRS data calls
- Fixed updater application to allow proper setup after Windows CE
- Fixed minor bug in charger driver
- Certain NAND flashes are sensitive to local bus activity. NAND flash driver updated to overcome this limitation.
- Initial release
- Fixed RTC access routines.
- Added drivers for UCB1400 touchscreen controller
- Changed default audio mixer settings
- Ethernet interface renaming is removed from udev rules
- Fixed library paths
- Initial release of Gentoo for CM-iGLX
- Added pcibios_set_master for ARM platforms with ITE8152 bridge. This allows proper setting of latency timer for PCI bus masters behind the bridge.
- Make default Debian file system image 512 Mbytes
- Added ability to specify wireless access point MAC address
- Added MMC support
- Serial tty assignment made compatible for CM-X270L and CM-X270W. From now, ttySA0 is default console on both CM-X270L and CM-X270W.
- Fixed wireless LAN driver bug that caused incorrect transmission power setting
- Added BGW200 Wireless LAN support for CM-X270L
- Initial release of Linux 2.6.16:
- - Power management support
- - Added CardBus support
- - Added 2700G frame buffer device driver
- - Audio support upgraded to work with ALSA, added recording support
|