UCM-iMX7 NXP i.MX7 SW Resources

UCM-iMX7 is an ultra miniature computer-on-module (CoM) / system-on-module (SoM) board designed to serve as a building block in embedded applications. UCM-iMX7 is built around the NXP i.MX7 System-on-Chip featuring an advanced ARM Cortex-A7 CPU coupled with a dedicated real-time ARM Cortex-M4 MCU. The SoC is supplemented with up-to 2GB DDR3 and 32GB of on-board SLC NAND or eMMC storage. In addition, the UCM-iMX7 features extensive connectivity with a wide range of industry standard interfaces – GbE, WiFi, Bluetooth, PCIe, USB and CAN bus. UCM-iMX7 is provided with comprehensive documentation and full ready-to-run SW support for Linux.

Linux	Yocto Linux

From time to time CompuLab releases new software versions for UCM-iMX7 in order to fix bugs, address component changes and add functionality. It is highly recommended to subscribe to the UCM-iMX7 RSS Feed in order to receive automatic notifications about software updates.

News RSS Feed

04-Dec-2017, CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 / UCM-iMX7 Yocto Linux release 1.2.0 Yocto 2.1 (Krogoth) Linux for UCM-iMX7 support: - Basic support for the UCM-iMX7 module as in Linux release 4.0 Automatic Installation System as in the Linux release 4.0 - Improved Automatic Installation Procedure - Add support for installing on eMMC and NAND flash Documentation - Initial Yocto Linux documentation for UCM-iMX7 17-Sep-2017, CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 / UCM-iMX7 Linux release 4.0 Linux kernel v4.1.15-cl-som-imx7-4.0 for UCM-iMX7 updates - Fixed PCIe reset - Enabled various config options Userspace updates: - Deploy new kernel, driver modules and device tree blobs - Install various packaged, e.g. pciutils, can-utils, wvdial and etc. Automatic Installation System - Improved Automatic Installation Procedure - Add support for installing on NAND flash Documentation - Updated multiple articles to comply with the new Linux package 18-Jun-2017, UCM-iMX7 Linux release 1.0 Initial release of Linux kernel v4.1.15-ucm-imx7-1.0 and Debian 8 Linux Demo image for UCM-iMX7 - Basic support for the UCM-iMX7 module and SB-UCM base board - Serial console support on UART1 - Green LED - MMC/SD, eMMC, USB, I2C, SPI - Storage: NAND, SPI flash, MMC/SD, USB - Freescale Ethernet Controller (FEC1) - PCIe - TSC2046 resistive touch panel controller support - HannStar HSD050IDW1/Startek KD050C-1A LCD panel support - PWM backlight for LCD - DVI display - AB1805 RTC support - Analog Audio - BCM4343W WiFi and Bluetooth - 2x CAN bus (FLEXCAN1 and FLEXCAN2) - Watchdog WD1 Documentation - Initial Linux documentation for UCM-iMX7 support