CL-SOM-iMX8X NXP i.MX 8X Yocto Linux

This page contains links to information about Yocto Linux distribution for the CompuLab CL-SOM-iMX8X System-on-Module / Computer-on-Module. The Yocto Project is an open-source collaboration focused on embedded Linux development.

Resources

Evaluation Getting started with CL-SOM-iMX8X Evaluation Kit Yocto Linux installation on SD card (recommended) Installing Yocto images on CL-SOM-iMX8X eMMC Yocto Linux package contents Development Building CL-SOM-iMX8X Yocto images Making Changes to Yocto Meta-Layers Building CL-SOM-iMX8X Linux Kernel Application Notes Introduction to Yocto development Developing with Qt on CompuLab platforms Optimizing eMMC lifetime and reliability

Release Notes RSS Feed

26-Sep-2019, CL-SOM-iMX8X Yocto Linux release 1.1 New supported HW features: - MIPI-DSI display - Capacitive touch screen - MIPI-CSI camera SW Features: - U-Boot access to the manufacturing details in the EEPROM Documentation: - Updated Yocto Linux documentation 21-Aug-2019, CL-SOM-iMX8X Yocto Linux release 1.0 Initial release of Yocto 2.5 (Sumo) for CL-SOM-iMX8X - Based on NXP release L4.14.98-2.0.0_ga - Kernel 4.14.98 - U-Boot 2018.03 Supported HW features: - Basic support for the CL-SOM-iMX8X module - Storage: eMMC, SD card, SPI flash - Networking: NXP Ethernet Controller (FEC) - Display: MIPI-DSI-to-HDMI display interface - Wireless: WiFi and Bluetooth (Intel 8265) - I/O: PCIe, I2C, CAN, USB2.0 host - System: RTC, heartbeat LED SW Features: - Chromium browser - Qt 5 - CompuLab Deployment Tool - CompuLab U-Boot Tool - fw_printenv/fw_setenv utilities provide R/W access to U-Boot environment from Linux CLI Documentation: - Initial Yocto Linux documentation for CL-SOM-iMX8X