Quick Setup

Connect HDMI monitor to the IOT-GATE-RPI5 display output using an HDMI cable. Connect USB mouse and keyboard devices to the IOT-GATE-RPI5 USB connectors.
- NOTE: Raspberry Pi O/S first boot setup requires display and keyboard. It cannot be completed via serial console.
- NOTE: IOT-GATE-RPI5 features mini-HDMI type-C connectors. To connect a standard HDMI type-A cable, use the Compulab IOTG2-ACC-HDMIC2A (or equivalent) adapter.
Connect power to IOT-GATE-RPI5 using one of the following options:
- Use the Compulab IOTG2-ACC-PSUTB3 PSU. Insert the PSU plug into the IOT-GATE-RPI5 DC input terminal block.
- Use any 12V–24V DC power supply. Use the IOT-GATE-RPI5 DC terminal block plug to connect the power supply wires and ensure correct polarity.
Once power is connected, IOT-GATE-RPI5 will turn on and boot into the O/S.
The ON LED indicates IOT-GATE-RPI5 system status:
- Blinking blue — the operating system is running correctly.
- Solid amber — unit is in boo-loader stage. O/S is not running.

IOT-GATE-RPI5 Overview

Figure	Callout	Function
	1	Industrial I/O terminal block Mating connector is included with the gateway
	2	USB3.0 port, type-A connector
	3	ETH1 100Mbit port, RJ45 connector
	4	ETH0 1000Mbit port, RJ45 connector. Supports PoE 802.3af (powered device)
	5	Antenna connector A (LTE main)
	6	Antenna connector B (GNSS / Mesh )
	7	Antenna connector C (WiFi / BT)
	8	DC power input connector Mating connector is included with the gateway
	9	Console connector, micro-USB type
	10	User programmable recessed push-button
	11	User programmable LED A (green / red)
	12	System status LED (blue / amber)

Figure	Callout	Function
	1	Display output 1, mini HDMI connector
	2	Display output 2, mini HDMI connector
	3	USB2.0 port, type-A connector

Figure	Callout	Function
	1	RTC battery holder
	2	Programming port (RPIboot), micro-USB connector
	3	Micro-SIM card socket.
	4	Service bay door
	5	Service bay screw