The following lists the known issues for the latest CM-T3530 software package:
| USB
|
- The USB OTG port (P8 on the SB-T35) only works in USB function mode (Active Sync).
- The USB OTG port does not support hot plug, it needs to be connected when the system reboots.
- USB Host port 1 (P21 on the SB-T35) only supports high speed USB devices.
|
| Splashscreen
|
- During WinCE boot the splashscreen disappears(showing white screen) a few seconds before the display driver starts.
- The splashscreen only works with the LCD shipped with the evaluation kit.
|
