U-Boot for CM-X300

The CompuLab CM-X300 module is using U-Boot boot-loader for low-level initializations and operating system loading. U-Boot is an open source firmware for wide range of embedded systems (e.g. PowerPC, ARM, MIPS, x86, ColdFire, AVR32, NIOS, etc.). On this page we will discuss only features and use cases related to CompuLab CM-X300 module. For more information on U-Boot, please refer to Official U-Boot Homepage. The most recent CompuLab U-Boot version for CM-X300 is checked out from v2009.03 of Das U-Boot repository and can be obtained from CompuLab website in binary form. CompuLab U-Boot source will be provided on request. Links to information about U-Boot package for CM-X300 modules: Firmware Update Firmware Development LCD and Splash screen U-Boot quick reference U-Boot images U-Boot documentation

News RSS Feed

04-Mar-2010 Added CM-X300: U-Boot: LCD and Splash screen article 09-Feb-2010 U-Boot 2009.03-cm-x300-4 release - Added DRAM size detection - Added LCD and Splash screen support - Added support for resume from S3/D4/C4 low power mode - Added I2C and PCA953X GPIO chip driver - Added support for USB port3 on modules without "W" option - Disabled debug output to FFUART - Fixed MFPR setup for PXA310 - Fixed VCC Core voltage configuration 10-Dec-2009 Added CM-X300: U-Boot: Firmware Development article 2-Sep-2009 U-Boot 2009.03-cm-x300-3 release - Added PXA310 USB support - Green LED (for CM-X300 revision 1.3 and higher) 27-May-2009 Initial release of U-Boot for CM-X300 documentation U-Boot 2009.03-cm-x300-2 release supports: - DA9030 power management chip - DM9000A Ethernet chip - PXA300 USB - Onboard NAND chip - Green LED (up to CM-X300 revision 1.2) - System revision and serial number in ATAGS