CM-X300: WinCE: Setting Up a Console

From Compulab Mediawiki
Revision as of 08:52, 15 March 2010 by Mike (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Take the following steps to setup a console for CM-X300

  1. Connect the CM-X300 to your desktop serial port with a cable is supplied in the evaluation kit. If your desktop does not have a serial port, it is possible to use a standard USB to serial adapter.
  2. Open Windows Hyper Terminal, and configure the connection with the following settings:
    • Baud rate: 38400
    • Parity: None
    • Data bits: 8
    • Stop bits: 1
Retrieved from "https://mediawiki.compulab.com/w/index.php?title=CM-X300:_WinCE:_Setting_Up_a_Console&oldid=923"