CL-SOM-iMX6: Evaluation Kit: Getting Started

SB-FX6 top view

SB-FX6 bottom view

System setup

CL-SOM-iMX6 evaluation kit is preloaded with Debian Linux image for CL-SOM-iMX6.

1. Connect a DVI/HDMI Display to HDMI connector J5 using a standard HDMI/DVI cable.
2. Connect a USB Keyboard to USB connector P13.
3. Make sure jumpers P31, E5 and E1 are not populated (default state).
4. Connect the standard USB cable (included) between your host PC and the evaluation kit micro-USB2.0 connector P20.
5. On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:

Baud Rate	Data Bits	Stop Bits	Parity	Flow Control
115200	8	1	none	none

Starting the system

1. Connect the DC 12V power supply adapter (included) to main DC power connector - J4.
2. Follow the messages in your terminal emulator program until you see the linux login prompt.

In case no messages appear in your terminal emulation program, please refer to the detailed USB console guide.

What Next?

• CL-SOM-iMX6 Linux guide
• CL-SOM-iMX6 evaluation kit hardware guide
• CL-SOM-iMX6 development resources