Transclusion: CL-SOM-iMX7: Yocto Linux: User Space

The article uses cl-rootfs hostname. A real hostname may be different.

Using Yocto Linux

Connection and Logging In

Use the root username to login:

cl-rootfs login: root

Networking

The networking configuration in the example Yocto Linux image is almost the same as in the Debian Linux image.

Analog Audio

Use aplay -l to list all sound cards and digital audio devices registered on the system:

root@cl-rootfs:~# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: clsomimx7 [cl-som-imx7], device 0: 308a0000.sai-wm8731-hifi wm8731-hifi-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Analog Audio Playback

In order to play back a sound file make use of the aplay application.

• aplay -L can be used for listing of all pcm devices.

Here is a sample output of aplay -L command:

root@cl-rootfs:~# aplay -L
null
    Discard all samples (playback) or generate zero samples (capture)
default:CARD=clsomimx7
    cl-som-imx7, 
    Default Audio Device
sysdefault:CARD=clsomimx7
    cl-som-imx7, 
    Default Audio Device
dmix:CARD=clsomimx7,DEV=0
    cl-som-imx7, 
    Direct sample mixing device
dsnoop:CARD=clsomimx7,DEV=0
    cl-som-imx7, 
    Direct sample snooping device
hw:CARD=clsomimx7,DEV=0
    cl-som-imx7, 
    Direct hardware device without any conversions
plughw:CARD=clsomimx7,DEV=0
    cl-som-imx7, 
    Hardware device with all software conversions

The next command can be used for audio play back:

root@cl-rootfs:~# aplay -D sysdefault <wav-file>

Audio Input Settings

CL-SOM-iMX7 provides an audio capturing feature from either Mic or Line In input sources. alsamixer or amixer can be used in order to switch between these inputs.

Mic

• alsamixer

Capture Volume => 100

Line Capture Switch => off

Mic Capture Switch => on

Input Mux => Mic

• amixer

amixer cset numid=1 65536
amixer -c 0 cset numid=3 31,31
amixer -c 0 cset numid=4 0
amixer -c 0 cset numid=6 1
amixer -c 0 cset numid=14 1

Line In

• alsamixer

Capture Volume => 100

Line Capture Switch => on

Mic Capture Switch => off

Input Mux => Line In

• amixer

amixer cset numid=1 65536
amixer -c 0 cset numid=3 31
amixer -c 0 cset numid=4 1
amixer -c 0 cset numid=6 0
amixer -c 0 cset numid=14 0

Sample Audio Recording

As soon as the correct input values have been set, audio signal can be captured. Here is a sample command that shows the arecord usage for capturing audio signal from the selected input line.

root@cl-rootfs:~# arecord -D sysdefault -d 10 -f dat -t wav /tmp/out.wav

WiFi

CL-SOM-iMX7 features 802.11b/g/n wireless connectivity solution, implemented with a TI WiLink8 Combo module. The device driver name is wl18xx.
By default all wireless interfaces are soft blocked. Use the rfkill utility to block/unblock wireless interfaces and display their status.

WiFi Initialization

• WiFi requires no user interaction for being configured. The driver gets loaded automatically.

Make sure that the WiFi driver is loaded:

root@cl-som-imx7:~# lsmod | grep wl18xx
wl18xx                 70950  0

The WiFi driver can be loaded manually:

root@cl-som-imx7:~# modprobe wl18xx
	wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2
	wlcore: WARNING falling back to default config
	wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
	wlcore: loaded

• iwconfig command from wireless-tools package can be used to retrieve detailed information about the WiFi interfaces:

root@cl-som-imx7:~# iwconfig wlan0
wlan0     IEEE 802.11  ESSID:off/any
          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on

• Unblock the interface:

root@cl-som-imx7:~# rfkill unblock wifi
wlcore: PHY firmware version: Rev 8.2.0.0.236
wlcore: firmware booted (Rev 8.9.0.0.69)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

• Activate the interface:

root@cl-som-imx7:~# ifconfig wlan0 up

• Sample WiFi scanning:

root@cl-som-imx7:~# iwlist wlan0 scan

The output will show the list of Access Points and Ad-Hoc cells in range. For more information about connecting to wireless networks and tuning WiFi interfaces refer to “wpa_supplicant” and “wireless-tools” man pages.

wpa_supplicant

• Configure wpa_supplicant to connect to SSID with no key management. Put the network name into the "ssid" fields:

root@cl-som-imx7:~# cat << EOF > /etc/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
network={
        ssid="wireless_network_name"
        key_mgmt=NONE
}
EOF

or with key management. Put the network name and the password into the "ssid/psk" fields:

root@cl-som-imx7:~# cat << EOF > /etc/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant

network={
        ssid="wireless_network_name"
        key_mgmt=WPA-PSK
        psk="wireless_network_password"
}
EOF

• Sample run

root@cl-som-imx7:~# ifconfig wlan0 up
root@cl-som-imx7:~# wpa_supplicant -B -Dwext -c /etc/wpa_supplicant.conf -i wlan0
root@cl-som-imx7:~# dhclient wlan0