Difference between revisions of "CL-SOM-iMX7: Linux: Kernel"

From Compulab Mediawiki
Jump to: navigation, search
(Getting kernel sources)
imported>Ilya
(Getting kernel sources)
(11 intermediate revisions by 5 users not shown)
Line 1: Line 1:
 
== Overview ==
 
== Overview ==
The Linux kernel for CL-SOM-iMX7 provides support for on-board peripherals and abstracts the functionality provided by the hardware.
+
The CL-SOM-iMX7 Linux kernel provides support for on-board peripherals/interfaces of the CL-SOM-iMX7 System-on-Module and the following CompuLab products built around CL-SOM-iMX7:
 +
* SBC-iMX7 Single Board Computer
 +
* SBC-IOT-iMX7 Internet of Things Single Board Computer
 +
* IOT-GATE-iMX7 Internet of Things Gateway
 +
BSP packages for different CompuLab i.MX7 devices may differ from each other. It is recommended to use the most recent BSP package released for the specific device being used. It can be downloaded from the corresponding product web page:
 +
* [https://www.compulab.com/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/#devres CL-SOM-iMX7 System-on-Module BSP package]
 +
* [https://www.compulab.com/products/sbcs/sbc-imx7-freescale-i-mx-7-single-board-computer/#devres SBC-iMX7 Single Board Computer BSP package]
 +
* [https://www.compulab.com/products/sbcs/sbc-iot-imx7-nxp-i-mx-7-internet-of-things-single-board-computer/#devres SBC-IOT-iMX7 Single Board Computer BSP package]
 +
* [https://www.compulab.com/products/iot-gateways/iot-gate-imx7-nxp-i-mx-7-internet-of-things-gateway/#devres IOT-GATE-iMX7 IoT Gateway BSP package]
 +
Unzip the downloaded BSP source package to a directory on your host workstation. The following instructions use {{filename|/path/to/cl-som-imx7-bsp-src/}} template for this location. Please use the real path to the Linux package instead.
  
 
== Building kernel for CL-SOM-iMX7 ==
 
== Building kernel for CL-SOM-iMX7 ==
Line 6: Line 15:
  
 
=== Getting kernel sources ===
 
=== Getting kernel sources ===
Linux git tree can be cloned or downloaded as a tarball from [http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/ Freescale public git repository].
+
Linux git tree can be cloned <!--or downloaded as a tarball -->from the [https://source.codeaurora.org/external/imx/linux-imx.git Code Aurora].
 
The instructions below assume that the {{filename|/home/development/cl-som-imx7/kernel}} directory has been created for CL-SOM-iMX7 kernel development.
 
The instructions below assume that the {{filename|/home/development/cl-som-imx7/kernel}} directory has been created for CL-SOM-iMX7 kernel development.
 +
<!--
 
==== Snapshot download ====
 
==== Snapshot download ====
* Download [http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/snapshot/linux-2.6-imx-deb84cde0da96c5ccccb7e4c1204ad89ee801eca.tar.gz deb84cde0da96c5ccccb7e4c1204ad89ee801eca] snapshot with your web browser.
+
* Download [http://git.freescale.com/git/cgit.cgi/imx/linux-imx.git/snapshot/linux-imx-rel_imx_4.9.x_1.0.0_ga.tar.gz rel_imx_4.9.11_1.0.0_ga] snapshot with your web browser.
 
+
* Extract the downloaded archive {{filename|linux-imx-rel_imx_4.9.x_1.0.0_ga.tar.gz}}
* Extract the downloaded archive {{filename|linux-2.6-imx-deb84cde0da96c5ccccb7e4c1204ad89ee801eca.tar.gz}}
 
 
<pre>
 
<pre>
 
cd /home/development/cl-som-imx7/kernel
 
cd /home/development/cl-som-imx7/kernel
tar xpf /path/to/downloaded/linux-2.6-imx-deb84cde0da96c5ccccb7e4c1204ad89ee801eca.tar.gz
+
tar xpf /path/to/downloaded/linux-imx-rel_imx_4.9.x_1.0.0_ga.tar.gz
mv linux-2.6-imx-deb84cde0da96c5ccccb7e4c1204ad89ee801eca linux-cl-som-imx7
+
mv linux-imx-rel_imx_4.9.x_1.0.0_ga linux-cl-som-imx7
 +
</pre>
 +
* Apply the CL-SOM-iMX7 patch
 +
<pre>
 +
cd /home/development/cl-som-imx7/kernel/linux-cl-som-imx7
 +
patch -p1 < /path/to/cl-som-imx7-linux/kernel/linux-4.9.11-cl-som-imx7-*.patch
 
</pre>
 
</pre>
 
+
-->
 
==== Git clone ====
 
==== Git clone ====
 
* Install [http://git-scm.com/ git] version control system.
 
* Install [http://git-scm.com/ git] version control system.
* Create a clone of the FreeScale Linux kernel tree
+
* Create a clone of the NXP Linux kernel tree
 
<pre>
 
<pre>
 
cd /home/development/cl-som-imx7/kernel
 
cd /home/development/cl-som-imx7/kernel
git clone git://git.freescale.com/imx/linux-2.6-imx.git linux-cl-som-imx7
+
git clone https://source.codeaurora.org/external/imx/linux-imx.git linux-cl-som-imx7
 
</pre>
 
</pre>
* Create a branch for CL-SOM-iMX7 development. The CL-SOM-iMX7 patches are generated vs. deb84cde0da96c5ccccb7e4c1204ad89ee801eca commit in the Linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.  
+
* Create a branch for CL-SOM-iMX7 development. The CL-SOM-iMX7 patches are generated vs. [https://source.codeaurora.org/external/imx/linux-imx/tag/?h=rel_virt_4.14.98_4.11_0.10_ga rel_virt_4.14.98_4.11_0.10_ga] tag in the Linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.  
 
<pre>
 
<pre>
 
cd /home/development/cl-som-imx7/kernel/linux-cl-som-imx7
 
cd /home/development/cl-som-imx7/kernel/linux-cl-som-imx7
git checkout -b development deb84cde0da96c5ccccb7e4c1204ad89ee801eca
+
git checkout -b development rel_virt_4.14.98_4.11_0.10_ga
 
</pre>
 
</pre>
 
+
* Apply the CL-SOM-iMX7 patch
==== Apply the CL-SOM-iMX7 patch ====
 
 
<pre>
 
<pre>
cd /home/development/cl-som-imx7/kernel/linux-cl-som-imx7
+
git am /path/to/cl-som-imx7-bsp-src/kernel/patches/*.patch
git am /path/to/cl-som-imx7-linux/kernel/patches/*.patch
 
 
</pre>
 
</pre>
  
Line 42: Line 54:
 
export ARCH=arm
 
export ARCH=arm
 
export CROSS_COMPILE=arm-none-linux-eabi-
 
export CROSS_COMPILE=arm-none-linux-eabi-
export DTB="imx7d-sbc-imx7.dtb imx7d-cl-som-imx7.dtb"
+
export DTB=$(ls -al arch/arm/boot/dts | awk '(/imx7d-.*imx7.*\.dts$/)&&($0=$NF)$$(gsub(/dts/,"dtb"))')
make cl_som_imx7_defconfig
+
make compulab_imx7_defconfig
 
make menuconfig
 
make menuconfig
 
make zImage modules ${DTB} && INSTALL_MOD_PATH=/home/development/cl-som-imx7/rootfs make modules_install
 
make zImage modules ${DTB} && INSTALL_MOD_PATH=/home/development/cl-som-imx7/rootfs make modules_install
Line 53: Line 65:
 
* loadable kernel modules will be installed into the {{filename|/home/development/cl-som-imx7/rootfs/lib/modules}} directory.
 
* loadable kernel modules will be installed into the {{filename|/home/development/cl-som-imx7/rootfs/lib/modules}} directory.
 
<br>
 
<br>
When the CL-SOM-iMX7 is booted with the kernel image created as described above and with networked root filesystem at {{filename|/home/development/cl-som-imx7/rootfs/}}, the system will be able to load the kernel modules properly, thus avoiding module version problems.
+
When CL-SOM-iMX7 is booted with the kernel image created as described above and with networked root filesystem at {{filename|/home/development/cl-som-imx7/rootfs/}}, the system will be able to load the kernel modules properly, thus avoiding module version problems.
  
 
==== zImage, DTB files and modules locations  ====
 
==== zImage, DTB files and modules locations  ====
Line 63: Line 75:
 
* DTB files
 
* DTB files
 
<pre>
 
<pre>
# cd /home/development/cl-som-imx7/kernel/linux-cl-som-imx7/arch/arm/boot/dtb/
+
# cd /home/development/cl-som-imx7/kernel/linux-cl-som-imx7/arch/arm/boot/dts/
 
# ls -al ${DTB}
 
# ls -al ${DTB}
 
# cd -
 
# cd -
Line 81: Line 93:
 
==== Prepare kernel and modules tarball  ====
 
==== Prepare kernel and modules tarball  ====
  
* In the example below, the Linux kernel and modules are packed into the tar archive for deploying onto the CL-SOM-iMX7.
+
* In the example below, the Linux kernel and modules are packed into the tar archive for deploying onto the CL-SOM-iMX7 on-board eMMC storage.
 
<pre>
 
<pre>
 
# mkdir -p /home/development/cl-som-imx7/rootfs/boot
 
# mkdir -p /home/development/cl-som-imx7/rootfs/boot
# cp -v /home/development/cl-som-imx7/kernel/linux-cl-som-imx7/arch/arm/boot/zImage /home/development/cl-som-imx7/rootfs/boot/zImage-cl-som-imx7
+
# cp -v /home/development/cl-som-imx7/kernel/linux-cl-som-imx7/arch/arm/boot/zImage /home/development/cl-som-imx7/rootfs/boot/
# cd /home/development/cl-som-imx7/kernel/linux-cl-som-imx7/arch/arm/boot/dtb/
+
# cd /home/development/cl-som-imx7/kernel/linux-cl-som-imx7/arch/arm/boot/dts/
 
# cp -v ${DTB} /home/development/cl-som-imx7/rootfs/boot/  
 
# cp -v ${DTB} /home/development/cl-som-imx7/rootfs/boot/  
 
# cd -
 
# cd -
# tar -C /home/development/cl-som-imx7/rootfs -czvf /home/development/cl-som-imx7/linux-image-cl-som-imx7.tar.gz .
+
# tar --keep-directory-symlink -C /home/development/cl-som-imx7/rootfs -czvf /home/development/cl-som-imx7/linux-image-cl-som-imx7.tar.gz .
 
</pre>
 
</pre>
  
 
== Basic platform support ==
 
== Basic platform support ==
  
The CL-SOM-iMX7 basic platform support is implemented in the {{parameter|imx7d-sbc-imx7.dtb imx7d-cl-som-imx7.dtb}} files of the Linux kernel source tree.
+
The CL-SOM-iMX7 basic platform support is implemented in the {{filename|imx7d-cl-som-imx7.dtb}} file of the Linux kernel source tree.
 
+
The extended interface support depends on carrier board used and thus is implemented in the Single Board Computer device tree files:
 +
* {{filename|imx7d-sbc-imx7.dtb}} - for SBC-iMX7 Single Board Computer
 +
** {{filename|imx7d-sbc-imx7-m4.dtb}} - for SBC-iMX7 Single Board Computer with Cortex-M4 core support
 +
** {{filename|imx7d-sbc-imx7-lvds.dtb}} - device tree blob for SBC-iMX7 Single Board Computer with LVDS support
 +
* {{filename|imx7d-sbc-iot-imx7.dtb}} - for IOT-GATE-iMX7 IoT Gateway and SBC-IOT-iMX7 Single Board Computer
 +
** {{filename|imx7d-sbc-iot-imx7-can.dtb}} - for IOT-GATE-iMX7 and SBC-IOT-iMX7 with CAN bus support
 +
** {{filename|imx7d-sbc-iot-imx7-rs485-hdx.dtb}} - for IOT-GATE-iMX7 and SBC-IOT-iMX7 with RS485 half duplex support
 
These files contain:
 
These files contain:
 
* default setup of multi-functional pins;
 
* default setup of multi-functional pins;
 
* registration of the devices integrated in the CL-SOM-iMX7 module;
 
* registration of the devices integrated in the CL-SOM-iMX7 module;
 
* definitions of platform-specific configuration for these devices.
 
* definitions of platform-specific configuration for these devices.
 +
<br>
 +
Alternative DTS file with additional peripherals: [https://github.com/compulab-yokneam/linux-nxp-compulab/blob/cl-som-imx7/next/arch/arm/boot/dts/imx7d-sbc-imx7.dts imx7d-sbc-imx7.dtb].
  
== Deploying the CL-SOM-iMX7 kernel and modules ==
+
== Deploying the CL-SOM-iMX7 kernel and modules onto eMMC ==
  
 
* Boot up the CL-SOM-iMX7 computer.
 
* Boot up the CL-SOM-iMX7 computer.
* Copy the previously created {{filename|linux-image-cl-com-imx7.tar.gz}} to {{filename|/root}} directory of the CL-SOM-iMX7.
+
* Copy the previously created {{filename|linux-image-cl-som-imx7.tar.gz}} to {{filename|/root}} directory of the CL-SOM-iMX7.
  
 
==== Mount boot partition ====
 
==== Mount boot partition ====
 
* Use the below command to mount the boot partition for installing the CL-SOM-iMX7 Linux kernel binary:
 
* Use the below command to mount the boot partition for installing the CL-SOM-iMX7 Linux kernel binary:
 
<pre>
 
<pre>
# boot_partition=`cat /proc/cmdline | awk '{ for (i=1;i<=NF;i++) { if($i~/^root=/) { print substr($i,6,length($i)-6)"1" } } }'`
+
# boot_partition=$(boot_partition=$(findmnt -o SOURCE -n /); cat <<< ${boot_partition:0:-1}1)
 
# mount $boot_partition /boot
 
# mount $boot_partition /boot
 
</pre>
 
</pre>
Line 116: Line 136:
 
<pre>
 
<pre>
 
# mkdir /boot/`uname -r`
 
# mkdir /boot/`uname -r`
# mv /boot/zImage-cl-som-imx7 /boot/*.dtb /boot/`uname -r`/
+
# mv /boot/zImage* /boot/*.dtb /boot/`uname -r`/
 
</pre>
 
</pre>
  
 
==== Installing kernel and modules ====
 
==== Installing kernel and modules ====
Assuming that the {{filename|linux-image-cl-com-imx7.tar.gz}} tar ball has been copied to the CL-SOM-iMX7 {{filename|/root}} directory.
+
Assuming that the {{filename|linux-image-cl-som-imx7.tar.gz}} tar ball has been copied to the CL-SOM-iMX7 {{filename|/root}} directory.
 
* Extract and install the Linux kernel binary:
 
* Extract and install the Linux kernel binary:
 
<pre>
 
<pre>
# tar -C / -xvf /root/linux-image-cl-com-imx7.tar.gz
+
# tar -C / --keep-directory-symlink -xvf /root/linux-image-cl-som-imx7.tar.gz
 
</pre>
 
</pre>
  
== U-Boot Environment ==
+
== Device Tree Examples ==
=== MMC Boot Parameters ===
+
The provided device tree in the BSP package is no using all the interfaces in the evaluation board.
To boot from MMC/SD card type:
 
<pre>
 
setenv mmcdev 0
 
setenv mmcblk mmcblk0p2
 
</pre>
 
Continue to the [[#Common Boot Parameters | Common Boot Parameters]].
 
 
 
=== eMMC Boot Parameters ===
 
To boot from internal eMMC storage type:
 
<pre>
 
setenv mmcdev 2
 
setenv mmcblk mmcblk2p2
 
</pre>
 
Continue to the [[#Common Boot Parameters | Common Boot Parameters]].
 
 
 
=== Common Boot Parameters ===
 
To boot Linux type:
 
<pre>
 
setenv loadaddr 0x80800000
 
setenv fdt_addr 0x83000000
 
setenv image zImage-cl-som-imx7
 
setenv fdt_file imx7d-sbc-imx7.dtb
 
setenv bootargs console=ttymxc0,115200 root=/dev/${mmcblk} rw rootwait
 
mmc dev ${mmcdev}
 
load mmc ${mmcdev} ${loadaddr} ${image}
 
load mmc ${mmcdev} ${fdt_addr} ${fdt_file}
 
bootz ${loadaddr} - ${fdt_addr}
 
</pre>
 
 
 
=== NFS Boot Parameters ===
 
To boot via network interface type:
 
<pre>
 
setenv loadaddr 0x80800000
 
setenv fdt_addr 0x83000000
 
setenv image zImage-cl-som-imx7
 
setenv fdt_file imx7d-sbc-imx7.dtb
 
setenv nfsserver <nfs server ip address>
 
setenv tftpserver <tftp server ip address>
 
setenv bootargs console=ttymxc0,115200 root=/dev/nfs rw ip=dhcp nfsroot=${nfsserver}:${nfsroot}
 
 
 
dhcp
 
tftpboot ${loadaddr} ${tftpserver}:${image}
 
tftpboot ${fdt_addr} ${tftpserver}:${fdt_file}
 
bootz ${loadaddr} - ${fdt_addr}
 
</pre>
 
  
 
== See also ==
 
== See also ==
 
* [[CL-SOM-iMX7: Evaluation Kit: Getting Started]]
 
* [[CL-SOM-iMX7: Evaluation Kit: Getting Started]]
 
* [[CL-SOM-iMX7: Evaluation Kit: Hardware Guide]]
 
* [[CL-SOM-iMX7: Evaluation Kit: Hardware Guide]]
* [[CL-SOM-iMX7: Linux: Getting started]]
+
* [[CL-SOM-iMX7: Linux: Automatic Installation]]
 +
* [[CL-SOM-iMX7: Linux: Manual Installation]]
 
* [[CL-SOM-iMX7: Linux: Debian]]
 
* [[CL-SOM-iMX7: Linux: Debian]]
 
* [[Linux: Development for ARM modules]]
 
* [[Linux: Development for ARM modules]]

Revision as of 07:00, 23 February 2020

Overview

The CL-SOM-iMX7 Linux kernel provides support for on-board peripherals/interfaces of the CL-SOM-iMX7 System-on-Module and the following CompuLab products built around CL-SOM-iMX7:

  • SBC-iMX7 Single Board Computer
  • SBC-IOT-iMX7 Internet of Things Single Board Computer
  • IOT-GATE-iMX7 Internet of Things Gateway

BSP packages for different CompuLab i.MX7 devices may differ from each other. It is recommended to use the most recent BSP package released for the specific device being used. It can be downloaded from the corresponding product web page:

Unzip the downloaded BSP source package to a directory on your host workstation. The following instructions use /path/to/cl-som-imx7-bsp-src/ template for this location. Please use the real path to the Linux package instead.

Building kernel for CL-SOM-iMX7

Getting kernel sources

Linux git tree can be cloned from the Code Aurora. The instructions below assume that the /home/development/cl-som-imx7/kernel directory has been created for CL-SOM-iMX7 kernel development.

Git clone

  • Install git version control system.
  • Create a clone of the NXP Linux kernel tree
cd /home/development/cl-som-imx7/kernel
git clone https://source.codeaurora.org/external/imx/linux-imx.git linux-cl-som-imx7
  • Create a branch for CL-SOM-iMX7 development. The CL-SOM-iMX7 patches are generated vs. rel_virt_4.14.98_4.11_0.10_ga tag in the Linux tree. It is recommended to use exactly the same baseline to avoid merge conflicts.
cd /home/development/cl-som-imx7/kernel/linux-cl-som-imx7
git checkout -b development rel_virt_4.14.98_4.11_0.10_ga
  • Apply the CL-SOM-iMX7 patch
git am /path/to/cl-som-imx7-bsp-src/kernel/patches/*.patch

Building the kernel

cd /home/development/cl-som-imx7/kernel/linux-cl-som-imx7
export ARCH=arm
export CROSS_COMPILE=arm-none-linux-eabi-
export DTB=$(ls -al arch/arm/boot/dts | awk '(/imx7d-.*imx7.*\.dts$/)&&($0=$NF)$$(gsub(/dts/,"dtb"))')
make compulab_imx7_defconfig
make menuconfig
make zImage modules ${DTB} && INSTALL_MOD_PATH=/home/development/cl-som-imx7/rootfs make modules_install

In the example above:

  • Linux kernel image (zImage) will be created in /home/development/cl-som-imx7/kernel/linux-cl-som-imx7/arch/arm/boot
  • device tree blobs will be created in /home/development/cl-som-imx7/kernel/linux-cl-som-imx7/arch/arm/boot/dts
  • loadable kernel modules will be installed into the /home/development/cl-som-imx7/rootfs/lib/modules directory.


When CL-SOM-iMX7 is booted with the kernel image created as described above and with networked root filesystem at /home/development/cl-som-imx7/rootfs/, the system will be able to load the kernel modules properly, thus avoiding module version problems.

zImage, DTB files and modules locations

  • In the example above, the Linux kernel image (zImage) will be created in the /home/development/cl-som-imx7/kernel/linux-cl-som-imx7/arch/arm/boot directory.
# ls -al /home/development/cl-som-imx7/kernel/linux-cl-som-imx7/arch/arm/boot/zImage
  • DTB files
# cd /home/development/cl-som-imx7/kernel/linux-cl-som-imx7/arch/arm/boot/dts/
# ls -al ${DTB}
# cd -
  • The loadable kernel modules will be installed into the /home/development/cl-som-imx7/rootfs/lib/modules directory.
# ls -al /home/development/cl-som-imx7/rootfs/lib/modules

Kernel Version

  • In the example above, the Linux kernel release version number will be saved in /home/development/cl-som-imx7/kernel/linux-cl-som-imx7/include/config/kernel.release
# cat /home/development/cl-som-imx7/kernel/linux-cl-som-imx7/include/config/kernel.release

Prepare kernel and modules tarball

  • In the example below, the Linux kernel and modules are packed into the tar archive for deploying onto the CL-SOM-iMX7 on-board eMMC storage.
# mkdir -p /home/development/cl-som-imx7/rootfs/boot
# cp -v /home/development/cl-som-imx7/kernel/linux-cl-som-imx7/arch/arm/boot/zImage /home/development/cl-som-imx7/rootfs/boot/
# cd /home/development/cl-som-imx7/kernel/linux-cl-som-imx7/arch/arm/boot/dts/
# cp -v ${DTB} /home/development/cl-som-imx7/rootfs/boot/ 
# cd -
# tar --keep-directory-symlink -C /home/development/cl-som-imx7/rootfs -czvf /home/development/cl-som-imx7/linux-image-cl-som-imx7.tar.gz .

Basic platform support

The CL-SOM-iMX7 basic platform support is implemented in the imx7d-cl-som-imx7.dtb file of the Linux kernel source tree. The extended interface support depends on carrier board used and thus is implemented in the Single Board Computer device tree files:

  • imx7d-sbc-imx7.dtb - for SBC-iMX7 Single Board Computer
    • imx7d-sbc-imx7-m4.dtb - for SBC-iMX7 Single Board Computer with Cortex-M4 core support
    • imx7d-sbc-imx7-lvds.dtb - device tree blob for SBC-iMX7 Single Board Computer with LVDS support
  • imx7d-sbc-iot-imx7.dtb - for IOT-GATE-iMX7 IoT Gateway and SBC-IOT-iMX7 Single Board Computer
    • imx7d-sbc-iot-imx7-can.dtb - for IOT-GATE-iMX7 and SBC-IOT-iMX7 with CAN bus support
    • imx7d-sbc-iot-imx7-rs485-hdx.dtb - for IOT-GATE-iMX7 and SBC-IOT-iMX7 with RS485 half duplex support

These files contain:

  • default setup of multi-functional pins;
  • registration of the devices integrated in the CL-SOM-iMX7 module;
  • definitions of platform-specific configuration for these devices.


Alternative DTS file with additional peripherals: imx7d-sbc-imx7.dtb.

Deploying the CL-SOM-iMX7 kernel and modules onto eMMC

  • Boot up the CL-SOM-iMX7 computer.
  • Copy the previously created linux-image-cl-som-imx7.tar.gz to /root directory of the CL-SOM-iMX7.

Mount boot partition

  • Use the below command to mount the boot partition for installing the CL-SOM-iMX7 Linux kernel binary:
# boot_partition=$(boot_partition=$(findmnt -o SOURCE -n /); cat <<< ${boot_partition:0:-1}1)
# mount $boot_partition /boot

Back up old kernel

  • It is essential to backup the old (known to work) kernel binary.
# mkdir /boot/`uname -r`
# mv /boot/zImage* /boot/*.dtb /boot/`uname -r`/

Installing kernel and modules

Assuming that the linux-image-cl-som-imx7.tar.gz tar ball has been copied to the CL-SOM-iMX7 /root directory.

  • Extract and install the Linux kernel binary:
# tar -C / --keep-directory-symlink -xvf /root/linux-image-cl-som-imx7.tar.gz

Device Tree Examples

The provided device tree in the BSP package is no using all the interfaces in the evaluation board.

See also