CL-SOM-iMX7 NXP i.MX7 U-Boot

From Compulab Mediawiki
Revision as of 08:11, 8 December 2016 by Grinberg (talk | contribs) (CL-SOM-iMX7 Freescale i.MX7 U-Boot moved to CL-SOM-iMX7 NXP i.MX7 U-Boot)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The CompuLab CL-SOM-iMX7 System-on-Module / Computer-on-Module is using U-Boot boot-loader for low-level initializations and operating system loading. U-Boot is an open source firmware for wide range of embedded systems (e.g. PowerPC, ARM, MIPS, x86, ColdFire, AVR32, NIOS, etc.). On this page we will discuss only features and use cases related to CompuLab CL-SOM-iMX7 module. For more information on U-Boot, please refer to Official U-Boot Homepage.

Cl-som-imx7-top.jpg
Resources
Evaluation
Development
Troubleshooting


News

07-Dec-2016, CL-SOM-iMX7 U-Boot release
Initial pre-release of U-Boot 2016.09-cl-som-imx7-0.91 for CL-SOM-iMX7
- MMC/SD Card
- eMMC
- SPI flash
- NAND flash
- Ethernet
- USB host and USB OTG in host mode
- Multiple I2C buses
- Green LED
Documentation
- Initial U-Boot documentation for CL-SOM-iMX7 support