CL-SOM-iMX7 NXP i.MX7 U-Boot

From Compulab Mediawiki
Revision as of 08:26, 26 October 2017 by Grinberg (talk | contribs)
Jump to: navigation, search

The CompuLab CL-SOM-iMX7 System-on-Module / Computer-on-Module is using U-Boot boot-loader for low-level initializations and operating system loading. U-Boot is an open source firmware for wide range of embedded systems (e.g. PowerPC, ARM, MIPS, x86, ColdFire, AVR32, NIOS, etc.). On this page we will discuss only features and use cases related to CompuLab CL-SOM-iMX7 module. For more information on U-Boot, please refer to Official U-Boot Homepage.

Cl-som-imx7-top.jpg
Resources
Evaluation
Development
Troubleshooting


News

24-Oct-2017, CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7 U-Boot release 1.0
U-Boot 2017.07-cl-som-imx7-1.0 for CL-SOM-iMX7 / IOT-GATE-iMX7 / SBC-IOT-iMX7
- Added SPL support
- Added automatic RAM detection
- Added LCD/DVI support with example presets
- Added Splash screen / Logo with video console
- Added USB keyboard support
- Added Secondary Ethernet interface support
- Added EEPROM layout commands
- Added automatic device tree (dtb) selection
- Improved NAND flash support coverage
- Fixed NAND bitflip for erased page
- Fixed NAND ECC strength calculation
Documentation
- Updated multiple articles to comply with the new U-Boot package
07-Dec-2016, CL-SOM-iMX7 U-Boot release
Initial pre-release of U-Boot 2016.09-cl-som-imx7-0.91 for CL-SOM-iMX7
- MMC/SD Card
- eMMC
- SPI flash
- NAND flash
- Ethernet
- USB host and USB OTG in host mode
- Multiple I2C buses
- Green LED
Documentation
- Initial U-Boot documentation for CL-SOM-iMX7 support