CL-SOM-iMX8: Evaluation Kit: Getting Started

From Compulab Mediawiki
Revision as of 12:17, 9 January 2018 by Igor (talk) (→‎System setup)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

CL-SOM-iMX8-eval-kit-quick-setup.jpg

System setup

  1. Connect a DVI/HDMI Display to HDMI connector J2 using a standard HDMI/DVI cable.
  2. Connect a USB Keyboard to USB connector U30.
  3. Make sure jumpers E3, E8 and E11 are not populated.
  4. Make sure jumpers E9 and E10 are populated (default state).
  5. Connect a standard USB cable (included in the kit) between your host PC and the evaluation kit micro-USB2.0 connector P12.
  6. On your computer, start a terminal emulation program (such as HyperTerminal) with the following serial port settings:
Baud Rate Data Bits Stop Bits Parity Flow Control
115200 8 1 none none

More Details: Connector J2, Connector U30, Connector P12.

Starting the system

  1. Connect the DC 12V power supply adapter (included) to main DC power connector - J3.
  2. Follow the messages in your terminal emulator program until you see the linux login prompt.
  3. Use the credentials below to login.
  • username: root
  • password: 111111
Admolition note.png In case no messages appear in your terminal emulation program, please refer to the detailed USB console guide.


What Next?

Retrieved from "https://mediawiki.compulab.com/w/index.php?title=CL-SOM-iMX8:_Evaluation_Kit:_Getting_Started&oldid=3920"