CL-SOM-iMX8X NXP i.MX 8X Yocto Linux

From Compulab Mediawiki
Revision as of 11:22, 3 December 2019 by imported>Igor.vaisbein
Jump to: navigation, search

This page contains links to information about Yocto Linux distribution for the CompuLab CL-SOM-iMX8X System-on-Module / Computer-on-Module.

The Yocto Project is an open-source collaboration focused on embedded Linux development.


Cl-som-imx8x system-on-module.jpg
Resources
Evaluation
Development
Application Notes


Release Notes

26-Sep-2019, CL-SOM-iMX8X Yocto Linux release 1.1
New supported HW features:
- MIPI-DSI display
- Capacitive touch screen
- MIPI-CSI camera
SW Features:
- U-Boot access to the manufacturing details in the EEPROM
Documentation:
- Updated Yocto Linux documentation
21-Aug-2019, CL-SOM-iMX8X Yocto Linux release 1.0
Initial release of Yocto 2.5 (Sumo) for CL-SOM-iMX8X
- Based on NXP release L4.14.98-2.0.0_ga
- Kernel 4.14.98
- U-Boot 2018.03
Supported HW features:
- Basic support for the CL-SOM-iMX8X module
- Storage: eMMC, SD card, SPI flash
- Networking: NXP Ethernet Controller (FEC)
- Display: MIPI-DSI-to-HDMI display interface
- Wireless: WiFi and Bluetooth (Intel 8265)
- I/O: PCIe, I2C, CAN, USB2.0 host
- System: RTC, heartbeat LED
SW Features:
- Chromium browser
- Qt 5
- CompuLab Deployment Tool
- CompuLab U-Boot Tool
- fw_printenv/fw_setenv utilities provide R/W access to U-Boot environment from Linux CLI
Documentation:
- Initial Yocto Linux documentation for CL-SOM-iMX8X