CM-A510: Linux: Debian

From Compulab Mediawiki
Revision as of 11:35, 3 November 2010 by Dimitry (talk | contribs) (1 revision(s))
Jump to: navigation, search

Overview

The example run-time Linux filesystem image for CM-A510 is based on Debian GNU/Linux Sid. The CompuLab Linux package for CM-A510 includes ready to run NAND flash image, archive of the root filesystem used to create the image and Linux kernel configuration and source code patches.

The default Debian Sid Linux image takes approximately 170 megabytes of flash space, and includes more than 400 software packages. Among them:

  • Core system
  • Debian package management system
  • X11 Windowing System
  • Enlightment E17 desktop manager
  • Netsurf web browser
  • Samba connectivity suite
  • SSH and FTP server and client

The Getting started with Linux on CM-A510 page provides a brief introduction on how to install the run-time Linux image. This article describes package structure and peripheral device options specific to the CM-A510.

CM-A510 specific settings

Connection and Logging In

Use the following usernames and passwords to login:

Account with administrative privileges:

User: root
Password: 111111

Regular user account:

User: user	
Password: 111111

In addition to these accounts CM-A510 allows anonymous FTP access. To login into the Linux system, you may use a serial console (ttyS0) at 115200 bps, or connect through the network, or use a keyboard and LCD display (tty1, tty2, tty3).

Networking

To configure networking, edit /etc/network/interfaces, /etc/resolv.conf, and /etc/hostname. For more information about Debian Linux network configuration, refer to Network configuration chapter in the Debian Reference.

Consoles

Linux file system image is designed to suit different kernel versions and configurations. Therefore, during the operating system startup, consoles at several serial ports and VGA display are enabled. Some of these devices may not be supported either because of kernel versions incompatibilities or because the kernel was not configured to support these devices. When the console is enabled at such device the following or similar message will appear on active console: INIT: Id "T0" respawning too fast: disabled for 5 minutes This is not an error message, it is just a warning that can be eliminated by editing /etc/inittab file.

X Windows system

CompuLab distribution contains full featured X Windows system with Enlightment window manager. Before starting X Windows, connect USB mouse and keyboard to the system. You can run X Windows by typing startx.

Software Management

Debian Linux for CM-A510 image includes all the information required to use Debian package management utilities. You can use apt-get and dpkg out of the box.


See also