CM-QS600: Android: Operating instructions

Overview

Most CM-QS600 supported features are operated using normal Android controls.
This page contains information about features and services, which are less straight-forward to operate, or are less widely known.

Operating instructions

Automatic suspend when inactive

By default, CM-QS600 is configured to stay awake while connected to the power.
In order to change this behavior, proceed to Settings->Developer options, uncheck Stay awake ... while charging to enable the device going to suspended state.

If Developer options item is hidden, re-introduce it proceeding to Settings->About tablet and clicking on Build number 7 times consequently.

Start-up script

/system/etc/startup-svc.sh script is run upon system boot by Android init process with root permissions.
As system partition is mounted 'read-only', one should remount system 'rw', prior to attempting to edit the script.

Networking

Normal Android behavior is to prioritize network interfaces (in descend order):

• Ethernet
• Wi-Fi
• 3G

Whenever higher-priority network interface is available, the lower-priority interfaces will be torn down.

(Optional) 3G Modem

In case Telit HE910-XX 3G modem is installed, it will be detected automatically, by start-up service, with no additional action required.

Audio sink selection

CM-QS600 may use either HDMI or analog audio device. Audio sink selection should be done with a designated application, e.g. SoundAbout, available via Google Play Store.

audio device	sink name
HDMI	Aux Digital (HDMI)
analog	Wired Headphones

If after making the selection with SoundAbout nothing happens, restart the application.