Difference between revisions of "CM-T3530: U-Boot: Known Issues"
| Line 1: | Line 1: | ||
{{IssueCategory|Multiple environment storage devices| | {{IssueCategory|Multiple environment storage devices| | ||
* After using usb commands in U-Boot, Linux might fail to detect USB devices. | * After using usb commands in U-Boot, Linux might fail to detect USB devices. | ||
| − | : '''Workaround:''' Reset the module before booting Linux. This can be done using the | + | : '''Workaround:''' Reset the module before booting Linux. This can be done using the reset button (SW2) or the U-Boot command {{cmd|reset}}. |
* While using the CB-T3 baseboard or the SB-T35 baseboard, with alternate boot selected, and the MMC card is not present in the socket, the boot process will default to the CM-T3530 primary storage (NAND flash), but U-Boot will still expect to find the environment in the MMC card. | * While using the CB-T3 baseboard or the SB-T35 baseboard, with alternate boot selected, and the MMC card is not present in the socket, the boot process will default to the CM-T3530 primary storage (NAND flash), but U-Boot will still expect to find the environment in the MMC card. | ||
: '''Workaround:''' Use the {{cmd|env device}} command to switch to the primary CM-T3530 storage:<pre>> env device nand import</pre> | : '''Workaround:''' Use the {{cmd|env device}} command to switch to the primary CM-T3530 storage:<pre>> env device nand import</pre> | ||
Revision as of 14:13, 3 December 2013
| Multiple environment storage devices |
|
